PN / SEC-SD-997AQ *
DEAD BOLT ELECTRIC FOR CONCEALED SECURITY
|
 |
-
Adds concealed deadbolt security to most wood or hollow metal doors,* with the added convenience of
electrical operation.
-
Fail-secure operation (locks if power
is lost).
-
Stainless steel bolt, 5/8" diameter,
5/8" throw.
-
Includes control wire which allows for releasing without cutting
unit's power.
-
Incorporates manual lock/unlock cylinder to operate the
SD-997A-DQ
if power is lost (turn lock knob from inside protected premises and/or use key from outside
protected premises).
-
Door open/close monitor (NO/C/NC).
-
Magnetic switch senses door position for
positive locking.
-
Solenoid attempts to lock several times and then shuts down if door not closed properly to prevent solenoid from burning out. Once door closed properly will
automatically lock.
-
Use with an optional digital keypad for high security
without a key.
-
Easily connects to
SECO-LARM's SK-983A Electronic Keypad.
-
Suitable for office-type applications.
-
Shallow design for use with most metal
door jambs.
-
No limiting installation orientation.
-
Powered by a solenoid.
-
Stainless steel for strength and long life Operatiing lifetime:
1,000,000 operations.
-
Adjustable door lock delay timer -
(0, 3, 5, or 9 seconds).
-
Power 12VDC, 880mA on activation,
330mA on standby.
-
Over-current protection 1.5A.
-
With control wire which allows for releasing without cutting
unit's power.
-
Stainless steel bolt, 5/8" diameter,
5/8" throw.
-
Lock body (faceplate) dimensions - 7-7/8"x1-5/16"
(200x32 mm).
-
Strike plate dimensions - 3-9/16"x1"x1-1/8"
(90x25x3 mm).
-
Plug: Special conic cavity stainless steel
(thickness 1.5mm~1.8mm).
|
*The SD-997A-DQ is designed for hollow metal door frames. It is not recommended for wooden door frames. However, the door can be wood or metal. Note: SECO-LARM also provides an electric deadbolt for Fail Safe operations, the SD-997BQ.
|