UNIVIEW OET-213H-BTM32 Thermal Face & Forehead Temperature Measurement Terminal

Call 1-800-888-8101 for pricing
Vendor UniView
In stock

Call: 800-888-8101

Fill Out Customer Application

PN / OET-213H-BTM32*

Digital Temperature Measurement Module for Face & Forehead Temperature Scanning along with Face Recognition & Access Control 

T-EP-S31 Stand Available but Not Included with 213H-BTM32

Temp Scanner is also available with Wrist Temp Scanner (UNV-OET-213H-BTS)

  • Supports non-contact detection of forehead temperature, support warning people with abnormal body temperature
  • Supports body temperature detection and personnel information binding, which can quickly confirm personnel information and do body temperature detection
  • Supports configure temperature detection threshold value, and personnel access authority can be configured through temperature detection threshold value
  • Non-contact wrist temperature detection module, measurement range is between 30℃ to 45℃, measurement accuracy can reach 0.1℃, measurement deviation is less than or equal to 0.5℃, and measurement distance is between 1cm to 3cm
  • Deep learning algorithm model based on UNV independent intellectual property rights, face recognition accuracy rate > 99%, false rate < 1%
  • Built-in deep learning dedicated chip, supports local offline recognition, 10,000 face capacity, face whitelist (1∶N)
  • Fastest recognition time 0.2 seconds, various model merge mode are used to reduce false rate and increase pass rate
  • WDR, 2MP (1080p) low illumination wide-angle camera and F1.6 large aperture lens for capturing high quality image with various complex lighting scenes

Product Features

  • Operation System - Linux
  • Face Recognition Accuracy Rate - >99%
  • Face Recognition Time - 200ms
  • Face Capacity - 10,000
  • Card Capacity - 100,000
  • Storage Capacity - 4GB
  • Event Capacity - 8,000 (with images)
  • Measurement Range - 30℃ - 45℃
  • Measurement Accuracy - 0.1℃
  • Measurement Deviation - ≤0.3℃
  • Measurement Distance - 1m
  • Authentication Mode - Face Whitelist∶ (1∶ N), Card: (1:N), Face +Body Temperature, Mask Detection
  • Door Opening Method - Face, Password, QR code, Card
  • Communication Mode - 10/100Mbps adaptive network port
  • Card Type - Mifare 1 Card
  • User Management - Support user library addition, deletion, update
  • Record Management - Support local recording and real-time upload
  • Interface - LAN x 1, Wiegand Input x 1, Wiegand Output x 1, RS485 x 1, Alarm Input x 2, Alarm Output x 1, USB2.0 x 1, Lock x 1, Door Contact x 1, Exit Button x 1
  • Power Supply - Input 12V±25% DC
  • Screen - Touch Screen, Size:7 inch, Resolution: 600 x 1024
  • Camera - Dual Lens, 2MP, 1080p
  • Supplement Light - LED soft light and infrared light
  • Dimensions (L x W x H) - For terminal : 134.0mm x 33.0mm x 305.0mm
  • Working Environment - For terminal: −20℃~ +65℃, Relative Humidly<95% (non-condensing), For module: 15℃~30℃
  • Protection Level - Both terminal and module: IP 54
  • Application Situation - Indoor, No wind



Temperature Measurement
1. Real-time temperature detection and screen display.
2. High temperature voice alarm.
3. Snap photos and overlay temperature OSD information.
4. Privacy mode: Only measure wristtemperature, not capturing face image

Face Recognition
Accuracy Rate:>99% without a mask;>90% with a mask
Fast Face Recognition Speed:0.2s
High Picture Capacity:Up to 10,000face capacity

Mask Wearing Detection
1. Support face recognition with mask.
2. UI can indicate whether he/she is wearing a mask or not.
3. Voice alarm for those who do not wear a mask.