PAM Distributing™
Wholesale Electronics
Wholesale Electronics
- Product Search
Website Pricing is 'Unofficial Pricing'.
Call your Sales Representative for accurate pricing and available quantities.
Pricing is subject to change without notice.
Page 1 --- Showing records 1 - 50 (out of 104)
SAME AS 1024ULXPD8 BUT WITH CI
Model AL1024ULXPD8CB power supply/charger converts a 115VAC 60Hz input,
to 24VDC @ 10 amp supply current for Access Control application, 24VDC
@ 8 amp supply current with 10 amp during alarm for Fire Alarm applications distributed via
eight (8) PTC protected Class 2 Rated outputs. Model AL1024ULXPD8 is a fuse
protected version of this unit.
Agency Listings UL Listed for Access Control Systems
(UL294),Power Supplies for Fire Protective Signaling
Systems (UL1481) CUL Listed - CSA Standard
C22.2 No.205-M1983, Signal Equipment File# S470. NFPA 72 Compliant
Features/Specifications
24VDC output 10 amp of continuous supply current for Access Control applications
8 amp of continuous supply current 10 amp during alarm for Fire Alarm applications
Class 2 Rated power limited outputs Eight (8) PTC protected outputs
PTCs are rated @ 2.5 amp.115VAC 60Hz, 4.4 amp input
Filtered and electronically regulated outputs Short circuit and thermal overload protection
Built-in charger for sealed lead acid or gel type battery backup Maximum charge
current .7 amp Zero voltage drop upon transfer to battery backup
AC input and DC output LED indicators
AC fail supervision (form "C" contact rated @ 1 amp 28VDC)
Low battery and battery presence
supervision
(form "C" contact rated @ 1 amp 28VDC)
Lifetime Warranty
Enclosure
Accommodates up to two (2) 12VDC/12AH batteries
Dimensions:
15.5"H x 12"W x 4.5"D
1/2" and 3/4" combination knockouts
Login or Call
for Pricing.
Special Order Item.
6/12 VDC 5AMP TIMER
Mandated Daylight Saving Time Change
All updated models have a yellow dot on the packaging. Microchips to
upgrade timers in the field or inventory are available at your distributor.
Overview:
The 6030 programmable timer is suitable for most functions that require a
timed operation e.g. Applications,Siren/Bell Cut Off Module, Dialer Delay, Guard Tour
Supervisory Timer, Pulser/Flasher
Features/Specifications
6VDC or 12VDC selectable operation
Quick and extremely accurate time range adjustment from 1 second to 60 minutes.
LED indicates relay is energized. Form "C" relay contacts are 5 amp at 120VAC/28VDC.
Current draw stand by 3mA relay energizes at 75mA. Repeat (flasher/pulse) mode.
Relay activates at the end of the timing cycle.
Lifetime Warranty
Board:
Dimensions (approximate):
2.5"W x 3"L x 0.75"
Login or Call
for Pricing.
Qty: ~4
Normal Stocking Item.
FULL FUNC.TIMER 24VDC
Mandated Daylight Saving Time Change.
All updated models have a yellow dot on the packaging
Microchips to upgrade timers in the field or inventory are
available at your distributor. Model 6062 programmable timer
is suitable for many functions that require a timed operation e.g.
Access Control Applications, Siren/Bell Cut Off Module,
Dialer Delay, Guard Tour Supervisory Timer, etc. Some optional
functions include: One Shot, Delayed Release, Delayed
Operate, Delayed Pulse and Pulser/Flasher. A new feature
has been added which provides a momentary relay activation
at the end of a desired timing cycle. This feature eliminates
the need for having to use two (2) timers to achieve this
function.Another new feature will cancel (interrupt) timing
cycle and reset timer if desired.
Features/Specifications
12VDC or 24VDC selectable operation.
Quick and extremely accurate time range adjustment
from 1 sec. to 60 min.LED indicates relay is energized.
Form "C" relay contacts are 8 AMP at 120VAC/28VDC.
Current Draw: Stand-by 3mA, Relay Energized 40mA.
Triggers via positive DC (+) voltage, dry contact closure,
or removal of contact closure.
Selectable relay activation at the start or end of the timing cycle.
One (1) second momentary relay activation at the end of the
timing cycle (eliminates the need to use two (2) timers for this
function). Built-in reset feature which cancels timing cycle.
Repeat (pulser/flasher) mode.
Snap Trac compatible (order Altronix model# ST3)
DIN Rail Mount version available (order Altronix model# DTMR1).
Lifetime Warranty
Board
Dimensions (approximate): 2.5"W x 3"L x 0.75"H
Login or Call
for Pricing.
Qty: ~11
Normal Stocking Item.
MULTI PURPOSE TIMER 4 HOUR
Mandated Daylight Saving Time Change
All updated models have a yellow dot on the packaging. Microchips to upgrade timers in the field
or inventory are available at your distributor.
Model 6062 programmable timer is suitable for many functions that require a timed operation e.g.
Access Control Applications, Siren/Bell Cut Off Module, Dialer Delay, Guard Tour Supervisory Timer, etc.
Some optional functions include: One Shot, Delayed Release, Delayed Operate, Delayed Pulse and Pulser/Flasher.
A new feature has been added which provides a momentary relay activation at the end of a desired
timing cycle. This feature eliminates the need for having to use two (2) timers to achieve this function.
Another new feature will cancel (interrupt) timing cycle and reset timer if desired.
Features/Specifications
12VDC or 24VDC selectable operation
Quick and extremely accurate time range adjustment from 1 sec. to 60 min
LED indicates relay is energized. Form "C" relay contacts are 8 AMP at 120VAC/28VDC.
Current Draw: Stand-by 3mA, Relay Energized 40mA, Triggers via positive DC (+) voltage, dry contact closure
or removal of contact closure. Selectable relay activation at the start or end of the timing cycle
One (1) second momentary relay activation at the end of the timing cycle
(eliminates the need to use two (2) timers for this function). Built-in reset feature which cancels timing cycle.
Repeat (pulser/flasher) mode. Snap Trac compatible (order Altronix model# ST3)
DIN Rail Mount version available (order Altronix model# DTMR1).
Lifetime Warranty
Board
Dimensions (approximate):
2.5"W x 3"L x 0.75"H
Login or Call
for Pricing.
Qty: ~2
Normal Stocking Item.
PWR SUP CHARGER .75AMPS @12VDC
12VDC power limited output.
75A continuous supply current @ 12.5 to 13.9VDC.
Filtered and electronically regulated outputs.
16.5VAC/20VA input from UL Listed, Class 2 transformer.
Short circuit and thermal overload protection.
Built-in charger for sealed lead acid or gel type battery backup.
Maximum charge current .5 amp.
Automatic switch to stand-by battery when AC fails.
AC input and DC output LED indicators.
Low battery and AC Fail supervision form “C" contacts (1 amp @ 28VDC).
Lifetime Warranty.
Specification Sheet: AX-AL100UL.pdf
Login or Call
for Pricing.
Qty: ~1
Normal Stocking Item.
12VDC 10AMP UL LISTED POWER SU
Login or Call
for Pricing.
Special Order Item.
10 AMP POWER SUPPLY CHARGER 24
10 AMP Power Supply Charger, 24VDC output, 115VAC 60Hz 4.4 amp input, w/ multi output access power controller
Specification Sheet: AX-AL1024ULAMCB.pdf
Login or Call
for Pricing.
Special Order Item.
REPLACEMENT POWER BOARD FOR AL
24VDC output.
8 amp of continuous supply current, 10 amp during alarm.
115VAC 60Hz, 4.4 amp input.
Filtered and electronically regulated outputs.
Short circuit and thermal overload protection.
Built-in charger for sealed lead acid or gel type battery backup.
Maximum charge current 3.6 amp.
Zero voltage drop upon transfer to battery backup.
AC input and DC output LED indicators.
AC fail supervision (form "C" contact rated @ 1 amp 28VDC).
Low battery and battery presence supervision
(form "C" contact rated @ 1 amp 28VDC).
Specification Sheet: AX-AL1024ULXB.pdf
Login or Call
for Pricing.
Special Order Item.
12/24 VDS ACCESS FACP SUP
Model AL175UL power supply/charger converts 115VAC 60Hz
input, into two (2) PTC protected 12VDC or 24VDC
@ 1.75 amp Class 2 Rated power limited
supply current outputs.
Agency Listings
UL Listed for Access Control Systems (UL294)
CUL Listed - CSA Standard C22.2 No.205-M1983
Signal Equipment. File# BP5864.
CSFM - California State Fire Marshal Approved.
File# 7315-1335:106. MEA - NYC Department
of Buildings Approved. NFPA 101 (Life Safety).
Features/Specifications
12VDC or 24VDC selectable output.
1.75 amp of continuous supply current.
Two (2) PTC protected Class 2 Rated power limited outputs.
115VAC 60Hz, .6 amp.
Filtered and electronically regulated outputs.
Dry Trigger Input. Short circuit and thermal overload protection.
Built-in charger for sealed lead acid or gel type battery backup.
Maximum charge current .4 amp.
Automatic switch to stand-by battery when AC fails.
AC fail supervision (form "C" contact rated @ 1 amp 28VDC).
Dry trigger output supervision (form "C" contact rated @ 1 amp 28VDC).
AC input and DC output LED indicators Lifetime Warranty
Enclosure
Dimensions:
8.5"H x 7.5"W x 3.5"D.
1/2" and 3/4" combination knockouts.
Login or Call
for Pricing.
Qty: ~3
Normal Stocking Item.
POWER SUPPLY/CHARGER THAT CONV
12VDC output.
1.75 amp of continuous supply current.
Class 2 Rated power limited output.
24VAC/40V amp. Use UL listed plug-in transformer.
Filtered and electronically regulated outputs.
Short circuit and thermal overload protection.
Built-in charger for sealed lead acid or gel type battery backup.
Maximum charge current .4 amp.
Automatic switch to stand-by battery when AC fails.
Zero voltage drop upon transfer to battery backup.
AC fail supervision (form "C" contact rated @ 1 amp 28VDC).
Low battery supervision (form "C" contact rated @ 1 amp 28VDC).
AC input and DC output LED indicators.
Specification Sheet: AX-AL201UL.pdf
Login or Call
for Pricing.
Special Order Item.
5 OUTPUT UL POWER SUPPLY 12/24
Model AL300ULM is specifically designed for use with access control systems and accessories.
This unit converts a 115VAC 60Hz input into five (5) PTC protected Class 2 Rated power limited outputs
rated @ 2 amp each, with an output current of 12VDC or 24VDC @ 2.5 amp total.
Model AL300ULMR is a Red Cabinet version of this product.
Agency Listings
UL Listed for Access Control Systems (UL294)
Power Supplies for use with Burglar Alarm Systems (UL603) Hospital Signaling and Nurse Call Equipment (UL1069)
Power Supplies for Fire Protective Signaling Systems (UL1481) CUL Listed - CSA Standard C22.2 No.205-M1983, Signal Equipment
File# S4707.CSFM -California State Fire Marshal Approved
File# 7315-1335:100. MEA - NYC Department of Buildings Approved. File# 168-92-E Vol. VI.
Features/Specifications
Power Supply/Charger 12VDC or 24VDC selectable output 2.5 amp supply current.
115VAC 60Hz, 1.45 amp input. Filtered and electronically regulated outputs
Short circuit and thermal overload protection.
Built-in charger for sealed lead acid or gel type battery backup Maximum charge current .7 amp
Zero voltage drop upon transfer to battery backup. AC input and DC output LED indicators.
AC fail supervision (form "C" contact rated @ 1 amp 28VDC).
Low battery and battery presence supervision (form "C" contact rated @ 1 amp 28VDC).
Lifetime Warranty
Multi-Output Module:
Five (5) PTC protected outputs.Class 2 Rated power limited outputs.
Current limit is 2 amp @ 12VDC or 24VDC per output. Provides power for Fail Safe and/or Fail Secure locking devices
Fire Alarm Panel or Access Control System trigger inputs NO or NC supervised trigger input and
polarity reversal trigger input (.4 amp draw from FACP) Lifetime Warranty.
Enclosure
Accommodates up to two (2) 12VDC/7AH batteries
Dimensions:
13.5"H x 13"W x 3.25"D
1/2" and 3/4" combination knockouts
Login or Call
for Pricing.
Special Order Item.
1 OUTPUT UL POWER SUPPLY 12/24
Model AL300ULXR power supply/charger converts a
115VAC 60Hz input, to a 2.5 amp of continuous supply
current @ 12VDC or 24VDC non-power limited output. Red Enclosure
Agency Listings
UL Listed for Access Control Systems (UL294)
Power Supplies for use with Burglar Alarm Systems (UL603),
Hospital Signaling and Nurse Call Equipment (UL1069),
Power Supplies for Fire Protective Signaling Systems (UL1481),
CUL Listed - CSA Standard C22.2 No.205-M1983, Signal Equipment.
File# S4707.CSFM - California State Fire Marshal Approved
File# 7315-1335:100.MEA - NYC Department of Buildings Approved
File# 168-92-E Vol. VI. NFPA 72 Compliant
Features/Specifications
12VDC or 24VDC selectable output
2.5 amp of continuous supply current output
Class 2 Rated power limited output.
115VAC 60Hz, 1.45 amp inputFiltered and
electronically regulated outputs
Short circuit and thermal overload protection
Built-in charger for sealed lead acid or gel type battery backup
Maximum charge current .7 amp. Zero voltage drop upon transfer to battery backup
AC input and DC output LED indicators AC fail supervision
(form "C" contact rated @ 1 amp 28VDC)
Low battery and battery presence supervision
(form "C" contact rated @ 1 amp 28VDC) Lifetime Warranty
Enclosure
Accommodates up to two (2) 12VDC/7AH batteries.
Dimensions:
13.5"H x 13"W x 3.25"D
1/2" and 3/4" combination knockouts
Login or Call
for Pricing.
Special Order Item.
12/24VDC 4A SUPPLY
Model AL400UL power supply converts a 115VAC
60Hz input, to 12VDC @ 4 amp or 24VDC @ 3 amp
of continuous supply current Class 2 Rated power
limited output.
Agency Listings
UL Listed for Access Control Systems (UL294)
Burglar Alarms Systems (UL603)
Hospital Signaling and Nurse Call Equipment (UL1069)
Power Supplies for Fire Protective Signaling Systems
(UL1481) ULC Listed File # S4707.
CSFM - California State Fire Marshal Approved.
File # 7315-1335:100.
MEA - NYC Department of Buildings Approved.
File # 168-92-E NFPA 72 Compliant.
Features/Specifications
12VDC or 24VDC selectable output.
4 amp @ 12VDC or 3 amp @ 24VDC of continuous
supply current output. Class 2 Rated power limited output.
115VAC 60Hz, 1.45 amp input.Filtered and
electronically regulated outputs.
Short circuit and thermal overload protection.
Built-in charger for sealed lead acid or gel type
battery backup.Maximum charge current .7 amp.
Zero voltage dropupon transfer to battery backup.
AC input and DC output LED indicators.
AC fail supervision (form "C" contact rated @ 1 amp
28VDC). Low battery supervision (form "C" contact rated
@ 1 amp 28VDC).Lifetime Warranty.
Enclosure
Dimensions: 12.25"H x 7.75"W x 4.5"D.
1/2 and 3/4 combination knockouts.
Similar Altronix Products AL400ULX 4 amp
@ 12VDC or 3 amp @ 24VDC. Larger Enclosure.
Login or Call
for Pricing.
Special Order Item.
UL/ADA 4AMP SUPPLY
Model AL400ULADA is specifically designed to interface between the FACP and indicating devices
to supply the additional power needed for a Fire Alarm System to conform to ADA regulations. For
both retrofit and new installations, the model AL400ULADA Fire Alarm Indicating Circuit Power Supply
will save time and expense, while efficiently providing the power needed to drive additional horns,
strobes and bells required under the ADA.
This unit allows compatibility between 12VDC fire alarm control panels and 24VDC ADA strobes
and other signaling devices. The AL400ULADA comes complete with power supply, enclosure,
transformer and ample room for standby batteries. On-board supervisory relays are incorporated
for remote status reporting and trouble indications at the fire panel.
Agency Listings
UL Listed Control Units and Accessories for Fire Alarm Systems (UL864).
File# S5075. CSFM - California State Fire Marshal Approved
File# 7315-1335:101. MEA - NYC Department of Buildings Approved.
Features/Specifications
12VDC or 24VDC selectable output 4 amp max total alarm current
115VAC 60Hz., 1.45 amp. Interfaces with one (1) FACP Class B indicating circuit
Compatible with 12VDC or 24VDC fire panels Short circuit and thermal overload protection.
Built-in charger for sealed lead acid or gel type battery backup
Maximum charge current .7 amp. Zero voltage drop upon transfer to battery backup.
AC input and DC output LED indicators. AC fail supervision (form "C" contact rated @ 1 amp 28VDC).
Low battery and battery presence supervision (form "C" contact rated @ 1 amp 28VDC).
Lifetime Warranty
Enclosure
Accommodates up to two (2) 12VDC/12AH batteries
Dimensions:
15.5"H x 12"W x 4.5"D
1/2" and 3/4" combination knockouts
Login or Call
for Pricing.
Qty: ~2
Normal Stocking Item.
POWER SUPPLY/CHARGER W/MULTI-O
Features/Specifications
Power Supply/Charger:12VDC or 24VDC
selectable output. 4 amp @ 12VDC or 3 amp
@ 24VDC of continuous supply current output.
Class 2 Rated power limited output.
115VAC 60Hz, 1.9 amp input.
Filtered and electronically regulated outputs.
Short circuit and thermal overload protection.
Built-in charger for sealed lead acid or gel type battery backup.
Maximum charge current .7 amp.
Zero voltage drop upon transfer to battery backup.
AC input and DC output LED indicators.
AC fail supervision (form "C" contact rated @ 1 amp 28VDC).
Low battery and battery presence supervision
(form "C" contact rated @ 1 amp 28VDC).
Lifetime Warranty.
Access Power Controller:
Eight (8) Access Control System outputs.
Eight (8) fuse protected Fail-Safe and/or Fail-Secure
12VDC or 24VDC power outputs.
Any power output may be converted to dry form "C"
relay output.Eight (8) fuse protected 12VDC
auxiliary power outputs (unswitched).
Red LEDs indicate outputs are triggered (relays energized).
Eight (8) Access Control System trigger inputs.
Eight (8) normally open (NO) inputs.Eight (8) open
collector inputs.Any combination of the above.
Fire Alarm Disconnect:
Fire Alarm Disconnect (latching or non-latching) is individually
selectable for any or all of the eight (8) outputs.
Normally open (NO) or normally closed (NC) dry contact input.
Polarity reversal input FACP signaling circuit.
Fire Alarm trigger LED indicates that the Fire
Alarm Disconnect has been activated.
Fire Alarm output relay for triggering auxiliary reporting
devices (form "C" contact rated @ 1 amp 28VDC).
Lifetime Warranty.
Enclosure
Accommodates up to two (2) 12VDC/12AH batteries.
Dimensions: 15.5"H x 12"W x 4.5"D
1/2" and 3/4" combination knockouts
Login or Call
for Pricing.
Special Order Item.
12 OR 24VDC BD ONLY
Model AL400ULB power supply/charger converts a 28VAC/100VA
input, to 12VDC @ 4 amp or 24VDC @ 3 amp of continuous
supply current output. Class 2 Rated power limited output.
Agency Listings
UL Recognized Component for Access Control Systems (UL294)
Power Supplies for use with Burglar Alarm Systems (UL603),
Power Supplies for Fire Protective Signaling Systems(UL1481).
File# S4707. NFPA 72 Compliant
Features/Specifications
12VDC or 24VDC selectable output
4 amp @ 12VDC or 3 amp @ 24VDC of continuous
supply current output.
Class 2 Rated Power limited output. 28VAC/175VA input.
Filtered and electronically regulated outputs
Short circuit and thermal overload protection.
Built-in charger for sealed lead acid or gel type battery backup
Maximum charge current .6 amp Zero voltage drop upon transfer to
battery backup. AC input and DC output LED indicators.
AC fail supervision (form "C" contact rated @ 1 amp 28VDC).
Low battery supervision (form "C" contact rated @ 1 amp 28VDC).
Lifetime Warranty
Board
Dimensions (approximate):
4.1"W x 7.1"L x 1.75"H
Login or Call
for Pricing.
Special Order Item.
12/24 VAC 4AMP 4 OUT FUSED
Model AL400ULPD4 power supply/charger converts a 115VAC 60Hz input, to a 4 amp of continuous supply
current @ 12VDC or 3 amp of continuous supply current
@ 24VDC distributed via four (4) fuse protected Class 2 Rated power limited outputs.
Model AL400ULPD4CB is a PTC protected version of this unit
Agency Listings
UL Listed for Access Control Systems (UL294),
Power Supplies for use with Burglar Alarm Systems (UL603),
Hospital Signaling and Nurse Call Equipment (UL1069), Power Supplies for Fire Protective Signaling Systems (UL1481)
CUL Listed - CSA Standard C22.2 No.205-M1983, Signal Equipment. File# S4707. NFPA 72 Compliant
Features/Specifications
12VDC or 24VDC selectable output
4 amp @ 12VDC or 3 amp @ 24VDC of continuous supply current output.
Four (4) fuse protected Class 2 Rated power limited outputs.
Fuses are rated @ 3.5 amp 115VAC 60Hz, 1.45 amp input.
Filtered and electronically regulated outputs Short circuit and thermal overload protection.
Built-in charger for sealed lead acid or gel type battery backup
Maximum charge current .7 amp Zero voltage drop upon transfer
to battery backup AC input and DC output LED indicators.
AC fail supervision (form "C" contact rated @ 1 amp 28VDC).
Low battery and battery presence supervision (form "C" contact rated
Lifetime Warranty
Enclosure
Accommodates up to two (2) 12VDC/7AH batteries
Dimensions:
13.5"H x 13"W x 3.25"D
1/2" and 3/4" combination knockouts
Login or Call
for Pricing.
Special Order Item.
12/24 VAC 4AMP 4 OUT W/CB
Model AL400ULPD4CB power supply/charger converts a 115VAC 60Hz input,
to a 4 amp of continuous supply current @ 12VDC or 3 amp of continuous supply
current @ 24VDC distributed via four (4) PTC protected Class 2 Rated power limited
outputs. Model AL400ULPD4 is a fuse protected version of this unit.
Agency Listings
UL Listed for Access Control Systems (UL294),
Power Supplies for use with Burglar Alarm Systems (UL603),
Hospital Signaling and Nurse Call Equipment (UL1069),
Power Supplies for Fire Protective Signaling Systems (UL1481),
CUL Listed - CSA Standard C22.2 No.205-M1983, Signal Equipment.
File# S4707.NFPA 72 Compliant
Features/Specifications
12VDC or 24VDC selectable output
4 amp @ 12VDC or 3 amp @ 24VDC of continuous supply current output.
Class 2 Rated power limited outputs.Four (4) PTC protected outputs.
PTCs are rated @ 2.5 amp.115VAC 60Hz, 1.45 amp input.
Filtered and electronically regulated outputs.Short circuit and thermal overload protection.
Built-in charger for sealed lead acid or gel type battery backup
Maximum charge current .7 amp.Zero voltage drop upon transfer to battery backup
AC input and DC output LED indicators.
AC fail supervision (form "C" contact rated @ 1 amp 28VDC)
Low battery and battery presence supervision
(form "C" contact rated @ 1 amp 28VDC)
Lifetime Warranty
Enclosure
Accommodates up to two (2) 12VDC/7AH batteries
Dimensions:
13.5"H x 13"W x 3.25"D
1/2" and 3/4" combination knockouts
Login or Call
for Pricing.
Special Order Item.
12/24VDC 4 AMP POWER SUPPLY
Model AL400ULPD8 power supply/charger converts a 115VAC 60Hz input, to a 4 amp of continuous supply current @ 12VDC or 3 amp of continuous supply current @ 24VDC distributed via eight (8) fuse protected Class 2 Rated power limited outputs. Model AL400ULPD8CB is a PTC protected version of this unit.
Agency Listings
UL Listed for Access Control Systems (UL294),
Power Supplies for use with Burglar Alarm Systems (UL603),
Hospital Signaling and Nurse Call Equipment (UL1069),
Power Supplies for Fire Protective Signaling Systems (UL1481),
CUL Listed - CSA Standard C22.2 No.205-M1983, Signal Equipment.
File# S4707.NFPA 72 Compliant
Features/Specifications
12VDC or 24VDC selectable output
4 amp @ 12VDC or 3 amp @ 24VDC of continuous supply current output.
Class 2 Rated power limited outputs Eight (8) fuse protected outputs.
Fuses are rated @ 3.5 amp 115VAC 60Hz, 1.45 amp input
Filtered and electronically regulated outputs Short circuit and thermal overload protection.
Built-in charger for sealed lead acid or gel type battery backup Maximum charge current .7 amp
Zero voltage drop upon transfer to battery backup. AC input and DC output LED indicators
AC fail supervision (form "C" contact rated @ 1 amp 28VDC).
Low battery and battery presence supervision (form "C" contact rated @ 1 amp 28VDC)
Lifetime Warranty
Enclosure
Accommodates up to two (2) 12VDC/7AH batteries
Dimensions:
13.5"H x 13"W x 3.25"D
1/2" and 3/4" combination knockouts
Login or Call
for Pricing.
Special Order Item.
UL 12/24VDC 4A SUPPLY
Features/Specifications 12VDC or 24VDC selectable output
4 amp @ 12VDC or 3 amp @ 24VDC of continuous supply
current output.Class 2 Rated power limited output.
115VAC 60Hz, 1.45 amp input.Filtered and
electronically regulated outputs. Short circuit and
thermal overload protection.
Built-in charger for sealed lead acid or gel type battery backup
Maximum charge current .7 amp Zero voltage drop
upon transfer to battery backup AC input and DC
output LED indicators AC fail supervision
(form "C" contact rated @ 1 amp 28VDC)
Low battery and battery presence supervision
(form "C" contact rated @ 1 amp 28VDC) Lifetime Warranty
Enclosure:
Accommodates up to two (2) 12VDC/7AH batteries
Dimensions:
13.5"H x 13"W x 3.25"D
1/2" and 3/4" combination knockouts
Login or Call
for Pricing.
Qty: ~2
Normal Stocking Item.
OFF-LINE SWITCHING POWER SUPPL
Model AL400ULXB power supply/charger converts a 115VAC 60Hz input,
to 12VDC @ 4 amp or 24VDC @ 3 amp of continuous supply current output.
Class 2 Rated power limited output.
Agency Listings
UL Recognized Component for Access Control Systems (UL294),
Power Supplies for use with Burglar Alarm Systems (UL603),
Hospital Signaling and Nurse Call Equipment (UL1069),
Power Supplies for Fire Protective Signaling Systems (UL1481)
File# S4707.NFPA 72 Compliant
Features/Specifications
12VDC or 24VDC selectable output
4 amp @ 12VDC or 3 amp @ 24VDC of continuous supply current output.
Class 2 Rated Power limited output.115VAC 60Hz, 1.45 amp input.
Filtered and electronically regulated outputs
Short circuit and thermal overload protection
Built-in charger for sealed lead acid or gel type battery backup
Maximum charge current .7 amp.Zero voltage drop upon transfer to battery backup
AC input and DC output LED indicators.
AC fail supervision (form "C" contact rated @ 1 amp 28VDC)
Low battery and battery presence supervision
(form "C" contact rated @ 1 amp 28VDC)
Lifetime Warranty
Board
Dimensions (approximate):
4.6"W x 7.5"L x 2.7"H
Login or Call
for Pricing.
Special Order Item.
12/24VAC 4AMP 4OUT W/CB
12/24VAC 4AMP 4OUT W/CB
Login or Call
for Pricing.
Special Order Item.
12/24VAC 4AMP 16OUT W CB
Model AL400ULXPD16 power supply/charger converts a 115VAC 60Hz input, to a 4 amp of continuous supply current @ 12VDC or 3 amp of continuous supply current @ 24VDC distributed
via sixteen (16) fuse protected Class 2 Rated power limited outputs. Model AL400ULXPD16CB is a PTC protected version of this unit.
Agency Listings
UL Listed for Access Control Systems
(UL294),
Power Supplies for use with Burglar Alarm Systems (UL603),Hospital Signaling and Nurse Call Equipment (UL1069), Power Supplies for Fire Protective Signaling Systems (UL1481),CUL Listed - CSA Standard C22.2 No.205-M1983, Signal Equipment.File# S4707.NFPA 72 Compliant
Features/Specifications
12VDC or 24VDC selectable output
4 amp @ 12VDC or 3 amp @ 24VDC of continuous supply current output.
Class 2 Rated power limited outputs.Sixteen (16) fuse protected outputs.
Fuses are rated @ 3.5 amp.115VAC 60Hz, 1.45 amp input.
Filtered and electronically regulated outputs Short circuit and thermal overload protection.
Built-in charger for sealed lead acid or gel type battery backup
Maximum charge current .7 amp Zero voltage drop upon transfer to battery backup.
AC input and DC output LED indicators.
AC fail supervision (form "C" contact rated @ 1 amp 28VDC).
Low battery and battery presence supervision (form "C" contact rated @ 1 amp 28VDC).
Lifetime Warranty
Enclosure
Accommodates up to two (2) 12VDC/12AH batteries.
Dimensions:
15.5"H x 12"W x 4.5"D
1/2" and 3/4" combination knockouts
Login or Call
for Pricing.
Special Order Item.
ACCESS POWER CONTROLLER w/POWE
Model AL600ULACM converts a 115VAC 60Hz input into eight (8) independently controlled
12VDC or 24VDC non power limited fuse protected Fail-Safe and/or Fail-Secure outputs with
a total of 6 amp continuous supply current.
The fire alarm disconnect feature enables emergency egress in the event the fire alarm system is
activated. It is individually selectable for any or all of the eight (8) outputs. Model AL600ULACMCB
is a PTC protected version of this unit.
Agency Listings
UL Listed for Access Control Systems (UL294) CUL Listed - CSA Standard C22.2 No.205-M1983,
Signal Equipment. File# BP6714. CSFM - California State Fire Marshal Approved
File# 7315-1335:106. MEA - NYC Department of Buildings Approved. File# 18-98-E Vol 3.
Features/Specifications
Power Supply/Charger: 12VDC or 24VDC selectable output 6 amp of continuous supply current
115VAC 60Hz, 1.9 amp input Filtered and electronically regulated outputs.
Short circuit and thermal overload protection. Maximum charge current .7 amp.
Zero voltage drop upon transfer to battery backup. AC input and DC output LED indicators.
AC fail supervision (form "C" contact rated @ 1 amp 28VDC). Low battery and battery presence supervision
(form "C" contact rated @ 1 amp 28VDC). Lifetime Warranty
Access Power Controller:
Eight (8) Access Control System outputs
Eight (8) fuse protected Fail-Safe and/or Fail-Secure 12VDC or 24VDC power outputs.
Eight (8) fuse protected 12VDC or 24VDC auxiliary power outputs (unswitched).
Red LEDs indicate outputs are triggered (relays energized).
Eight (8) Access Control System trigger inputs
Eight (8) normally open (NO) inputs.
Eight (8) open collector inputs Any combination of the above
Fire Alarm Disconnect:Fire Alarm Disconnect (latching or non-latching) is individually
selectable for any or all of the eight (8) outputs.Normally open (NO) or normally closed (NC) dry contact input.
Polarity reversal input FACP signaling circuit. Fire Alarm trigger LED indicates that the Fire Alarm Disconnect has been activated.
Fire Alarm output relay for triggering auxiliary reporting devices (form "C" contact rated @ 1 amp 28VDC).
Lifetime Warranty
Enclosure
Accommodates up to two (2) 12VDC/12AH batteries
Dimensions:
15.5"H x 12"W x 4.5"D
1/2" and 3/4" combination knockouts
Login or Call
for Pricing.
Special Order Item.
UL 12/24VDC 6A SUPPLY
Model AL600ULX power supply/charger converts a 115VAC 60Hz input, to a
6 amp of continuous
supply current @ 12VDC or 24VDC non-power limited output
Agency Listings
UL Listed for Access Control Systems (UL294) Power Supplies for Fire Protective
Signaling Systems (UL1481) CUL Listed - CSA Standard C22.2 No.205-M1983
Signal Equipment File# S4707.CSFM -California State Fire Marshal Approved
File# 7315-1335:104.MEA - NYC Department of Buildings Approved
File# 168-92-E Vol. III.FM Approved NFPA 72 Compliant
Features/Specifications
12VDC or 24VDC selectable output 6 amp of continuous supply current
115VAC 60Hz, 1.9 amp input Filtered and electronically regulated outputs.
Short circuit and thermal overload protection.
Built-in charger for sealed lead acid or gel type battery backup.
Maximum charge current .7 amp.Zero voltage drop upon transfer to battery
backup.
AC input and DC output LED indicators AC fail supervision
(form "C" contact rated @ 1 amp 28VDC).
Low battery and battery presence supervision
(form "C" contact rated @ 1 amp 28VDC).
Lifetime Warranty
Enclosure
Accommodates up to two (2) 12VDC/7AH batteries.
Dimensions:
13.5"H x 13"W x 3.25"D.
1/2" and 3/4" combination knockouts.
Specification Sheet: AX-AL600ULX.pdf
Login or Call
for Pricing.
Qty: ~2
Normal Stocking Item.
SAME AS AX-AL600UL/ADA BUTTEMP
Model AL602ULADA is an extremely cost effective 6.5 amp voltage regulated remote power supply/battery charger.
It maybe connected to any 24 volt Fire Alarm Control Panel (FACP).
Primary applications include Notification Appliance Circuit (NAC such as strobes and
horns) expansion support to meet ADA requirements. It also provides auxiliary power to support system accessories.
The unit delivers regulated and filtered 24 volt power to Class B or Class A NAC loop circuits. Additionally, a separate 1.0A auxiliary output with reset forfour (4)-wire smoke detectors is available. The 6.5 amp rated supply current can be divided between the four (4) outputs for powering
NAC devices.
Each output is rated at 2.5 amp max. and can be independently programmed for Steady, Temporal Code 3 or Strobe Synchronization. All outputs may be programmed for Input to Output Follower Mode (output will follow input. i.e. March Time Input, March Time Output).
An individual output of 4 amp is achieved by paralleling 2 outputs. In non alarm condition independent loop supervision for Class A and/or Class B FACP NAC circuits is provided. In the event of a loop trouble the FACP will be
Two (2)FACP signaling outputs can be employed and directed to control supervision and power delivery to any combination of the four (4) outputs.
The unit also features “Loop Output" trouble memory indication to help identify troublesome sporatic problems. Model is available in a largerenclosure
AL602ULADAJ.
Agency Listings
UL Listed Control Units and Accessories for Fire Alarm
Systems (UL864).File# S5075. CSFM California State Fire Marshal Approved File# 7315-1335:103. MEA –NYC Department of Buildings Approved FM Approved.
Features/Specifications
Power Supply/Charger 24VDC output.
6.5 amp max total alarm current
115VAC 60Hz. 1.45 amp.
Short circuit and thermal overload protection. Built-in charger for sealed lead acid or gel type battery backup.
Maximum charge current .7 amp. Zero voltage drop upon transfer to battery backup. AC input and DC output LED indicators. AC fail supervision (form "C" contact rated@ 1 amp 28VDC).
Low battery and battery presence supervision (form "C" contact rated @ 1 amp 28VDC).
Lifetime Warranty.
Logic Board:
Class 2 Rated power limited outputs. Two (2) Class A or two (2) Class B FACP inputs. Two (2) Class A or four (4) Class B Indicating Circuits.
Two (2) Class B outputs may be paralleled for more power on an indicating circuit. One (1) Aux. Power Output @ 1 amp supply current (w/Battery Back Up)
Signal Circuit Trouble Memory - facilitates quickly locating intermittent system trouble and eliminates costly and unnecessary service calls.
LEDs indicate a prior fault (short, open, ground) has occured on one or more signaling circuit outputs. 2-wire horn/strobe Sync mode allows audible notification appliances (horns) to be silenced while visual notification
appliances (strobes) continue to operate.
Horn/Strobe sync protocols include: Wheelock Gentex , System Sensor , Faraday, Amseco Temporal Code 3 Mode Steady Mode. Input to Output
Follower Mode (maintains synchronization of notification appliance circuits).March Time Compatible with 24VDC or 12VDC
fire panels Common Trouble inputs and outputs. Ground fault detection Lifetime Warranty
Enclosure
Accommodates up to two (2) 12VDC/12AH batteries.
Dimensions: 15.5"H x 12"W x 4.5"D.
1/2" and 3/4" combination knockouts.
Login or Call
for Pricing.
Normal Stocking Item.
NAC POWER EXTENDERS 6.5 AMP 12
NAC POWER EXTENDERS
6.5 AMP
12 OR 24VDC
TWO CLASS A OR FOUR CLASS B OUTPUTS
SYNC PROTOCOLS
• The AL602UL2ADA, AL802UL2ADA and AL1002UL2ADA are extremely cost
effective voltage regulated remote NAC Power Extenders. They may be
connected to any 12 or 24 volt Fire Alarm Control Panel (FACP). Primary
applications include Notification Appliance Circuit (NAC) expansion
(supports ADA requirements) and will provide auxiliary power to support
system accessories.
AL602UL2ADA
• 24VDC or 12VDC
rated @ 6.5 amp max.
• Two (2) Class A or
four (4) Class B outputs.
AL802UL2ADA
• 24VDC or 12VDC
rated @ 8 amp max.
• Two (2) Class A or
four (4) Class B outputs.
AL1002UL2ADA
• 24VDC rated
@ 10 amp max.
• Two (2) Class A or
four (4) Class B outputs
Login or Call
for Pricing.
Special Order Item.
PWR SUP BRD 6 12 24 V
The AL624 Linear Power Supply / Charger will convert a
low voltage AC input to a low voltage DC output. This
general purpose power supply has a wide range of
applications for access control, security and CCTV system
accessories that require additional power.
Specifications:
Selectable 6-12-24VDC power limited output.
1.2 amp continuous supply current at 6-12VDC.
750mA continuous supply current at 24VDC.
Filtered and electronically regulated output.
Built-in charger for sealed lead acid or gel type batteries.
Maximum charge current 300mA.
Automatic switchover to stand-by battery when AC Fails.
AC input and DC output LED indicators.
Thermal and short circuit protection with auto reset.
Fused battery protection (circuit breakers available).
Snap Trac compatible (order Altronix model #ST3).
DIN Rail mount version available
(order Altronix model #DPS1).
Includes battery leads.
Extremely compact design.
Board dimensions: 3"L x 2.5"W x 1.5"H
Login or Call
for Pricing.
Qty: ~10
Normal Stocking Item.
12/24 VDC 6.5 AMP W/4 CLASS A
Model AL642ULADA is an extremely cost effective 6.5 amp voltage regulated remote NAC Power Extender. It may be connected to any 24 volt Fire Alarm Control Panel (FACP). Primary applications include Notification Appliance Circuit (NAC) expansion (supports ADA requirements) and will provide auxiliary power to support system accessories.
The unit delivers regulated and filtered 24 volt power via up to eight (8) Class B, four (4) Class A or combination of Class B and Class A Notification Appliance Circuits. Additionally, the unit can supply up to 1 amp from continous AUX output and up to 1 amp from AC disconnected AUX ouput. The 6.5 amp rated supply current can be divided between the four (4) outputs for powering notification appliances and the AUX outputs.
Each output is rated at 2.5 amp max (total not to exceed 6.5 amp), and can be independently programmed for Steady, Temporal Code 3 or Strobe Synchronization. All outputs may be programmed for Input to Output Follower Mode (output will follow input. i.e. March Time Input, March Time Output). An individual output of 4 amp is achieved by paralleling 2 outputs.
In non-alarm condition units provide independent loop supervision for Class A and/or Class B FACP NAC circuits. In the event of a loop trouble the FACP will be notified via steered inputs (input 1 or input 2). In addition, there are common trouble output terminals (NC, C, NO) which are used to indicate general loop/system trouble.
A common trouble input is provided for optional NC (normally closed) devices to report trouble to the FACP. Two (2) FACP signaling outputs can be connected to power extender inputs. These inputs can then be directed to control supervision and power delivery to any combination of the four (4) outputs. The unit also feature “Loop Output" trouble memory indication to help identify troublesome sporatic loop problems.
Agency Listings
UL Listed Control Units and Accessories for Fire Alarm Systems (UL864).File# S5075.
CSFM - California State Fire Marshal Approved
File# 7315-1335:109.MEA - NYC Department of Buildings Approved FM Approved.
Features/Specifications
Power Supply/Charger 24VDC output 6.5 amp max total alarm current.
115VAC 60Hz., 3.2 amp.Short circuit and thermal overload protection.
Built-in charger for sealed lead acid or gel type battery backup
Maximum charge current .7 amp Zero voltage drop upon transfer to battery backup.
AC input and DC output LED indicators AC fail supervision (form "C" contact rated @ 1 amp 28VDC).
Low battery and battery presence supervision (form "C" contact rated @ 1 amp 28VDC) Lifetime Warranty
Logic Board:
Class 2 Rated power limited outputs.
Two (2) Class A or two (2) Class B FACP inputs
Two (2) NC dry contact trigger inputs
Four (4) Class A or four (4) Class B Indicating Circuits
Two (2) Class B outputs may be paralleled for more power on an indicating circuit.
One (1) Aux. Power Output @ 1 amp supply current (w/Battery Back Up).
One (1) Aux. Power Output @ 1 amp supply current (w/o Battery Back Up).
Signal Circuit Trouble Memory - facilitates quickly locating intermittent system trouble and eliminates costly and
unnecessary service calls. LEDs indicate a prior fault (short, open, ground) has occured on one or
more signaling circuit outputs.
2-wire horn/strobe Sync mode allows audible notification appliances (horns) to be silenced while visual notification
appliances (strobes) continue to operate Horn/Strobe sync protocols include: Wheelock , Gentex , System Sensor ,
Faraday, Amseco Temporal Code 3 Mode Steady Mode.
Input to Output Follower Mode (maintains synchronization of notification appliance circuits).
March Time Compatible with 24VDC or 12VDC fire panels Common Trouble inputs and outputs.
Ground fault detection Lifetime Warranty
Enclosure
Accommodates up to two (2) 12VDC/12AH batteries.
Dimensions:
18"H x 14.5"W x 4.625"D
1/2" and 3/4" combination knockouts
Login or Call
for Pricing.
Special Order Item.
AL-802ULADA BOARD ONLY
REPLACEMENT BOARD
Login or Call
for Pricing.
Normal Stocking Item.
UL/ADA 8 AMP SUPPLY
Model AL802ULADA is an extremely cost effective 8 amp voltage regulated remote power supply/battery charger. It may be connected to any 24 volt Fire Alarm Control Panel (FACP). Primary applications include Notification Appliance Circuit (NAC such as strobes and horns) expansion support to meet ADA requirements. It also provides auxiliary power to support system accessories.
The unit delivers regulated and filtered 24 volt power to Class B or Class A NAC loop circuits. Additionally, a separate 1.0A auxiliary output with reset for four (4)-wire smoke detectors is available. The 8 amp rated supply current can be divided between the four (4) outputs for powering NAC devices. Each output is rated at 2.5 amp max., and can be independently programmed for Steady, Temporal Code 3 or Strobe Synchronization.
All outputs may be programmed for Input to Output Follower Mode (output will follow input. i.e. March Time Input, March Time Output). An individual output of 4 amp is achieved by paralleling 2 outputs. In non-alarm condition independent loop supervision for Class A and/or Class B FACP NAC circuits is provided. In the event of a loop trouble the FACP will be notified via the steered input (input 1 or input 2).
In addition, there are common trouble output terminals (NC, C, NO) which are used to indicate general loop/system trouble. A common trouble input is provided for optional NC (normally closed) devices to report trouble to the FACP. Two (2) FACP signaling outputs can be employed and directed to control supervision and power delivery to any combination of the four (4) outputs.
The unit also features “Loop Output" trouble memory indication to help identify troublesome sporatic problems.
Model is available in a larger enclosure AL802ULADAJ.
Agency Listings
UL Listed Control Units and Accessories for Fire Alarm Systems (UL864).File# S5075.
CSFM - California State Fire Marshal Approved File# 7315-1335:107.
MEA - NYC Department of Buildings Approved.FM Approved.
Features/Specifications
Power Supply/Charger: 24VDC output 8 amp max total alarm current 115VAC 60Hz., 1.45 amp.
Short circuit and thermal overload protection Built-in charger for sealed lead acid or gel type battery backup.
Maximum charge current .7 amp Zero voltage drop upon transfer to battery backup.
AC input and DC output LED indicators AC fail supervision (form "C" contact rated @ 1 amp 28VDC).
Low battery and battery presence supervision (form "C" contact rated @ 1 amp 28VDC).
Lifetime Warranty
Logic Board:
Class 2 Rated power limited outputs.
Two (2) Class A or two (2) Class B FACP inputs
Two (2) NC dry contact trigger inputs
Two (2) Class A or four (4) Class B Indicating Circuit.
Two (2) Class B outputs may be paralleled for more power on an indicating circuit.
One (1) Aux. Power Output @ 1 amp supply current (w/Battery Back Up).
Signal Circuit Trouble Memory - facilitates quickly locating intermittent system trouble and eliminates costly and
unnecessary service calls. LEDs indicate a prior fault (short, open, ground) has occured on one or
more signaling circuit outputs.
2-wire horn/strobe Sync mode allows audible notification appliances (horns) to be silenced while visual notification
appliances (strobes) continue to operate.
Horn/Strobe sync protocols include: Wheelock , Gentex , System Sensor , Faraday, Amseco.
Temporal Code 3 Mode.Steady Mode Input to Output Follower Mode (maintains synchronization of notification appliance circuits).
March Time Compatible with 24VDC or 12VDC fire panels. Common Trouble inputs and outputs
Ground fault detection Lifetime Warranty
Enclosure
Accommodates up to two (2) 12VDC/12AH batteries
Dimensions:
15.5"H x 12"W x 4.5"D.
1/2" and 3/4" combination knockouts
Login or Call
for Pricing.
Special Order Item.
SIREN DRIVER 6-12 VDC
Model ALSD1 is a high output very low current draw dual channel
siren driver designed to work with
alarm panels with limited
current capability.
Features/Specifications
6VDC or 12VDC operation
Parallel or series speaker wiring:
113 db @ 10' @ 6 Volts - 8 Ohms
115 db @ 10' @ 6 Volts - 4 Ohms
116 db @ 10' @ 12 Volts - 8 Ohms
120 db @ 10' @ 12 Volts - 4 Ohms
Current draw range from .5 amp to 1.8 amp based on speaker
resistance and supply voltage. Two (2) channel operation - steady or yelp.
Very low current draw Lifetime Warranty
Board
Dimensions (approximate):
2.75"W x 1.1"L x 1.75"H
Login or Call
for Pricing.
Special Order Item.
LOW CURRENT DRAW DRIV
Model ALSD2 is a high output very
low current draw dual channel
siren driver designed to work with
alarm panels with limited
current capability.
Features/Specifications
6VDC or 12VDC operation
Parallel or series speaker wiring:
103 db @ 10 ft. @ 6V - 8 Ohms
105 db @ 10 ft. @ 6V - 4 Ohms
106 db @ 10 ft. @ 12V - 8 Ohms
111 db @ 10 ft. @ 12V - 4 Ohms
Current draw range from .3 amp to
1.22 amp based on speaker
resistance and supply voltage
Two (2) channel operation - steady
or yelp. Very low current draw
Lifetime Warranty
Board
Dimensions (approximate):
2.75"W x 1.1"L x 1.75"H
Login or Call
for Pricing.
Qty: ~54
Normal Stocking Item.
24VAC/12VDC POWER SUPPLY
Model ALTV1224C provides 12VDC @ 3.5 amp total supply current
distributred via eight (8) fuse protected outputs and 24VAC @ 3.5 amp total
supply current distributed via eight (8) fuse protected outputs.
Agency Listings
CE Approved.
Features/Specifications
12VDC and 24VAC output
3.5 amp @ 12VDC and 3.5 amp @ 24VAC totalsupply current output.
7 amp total output current Eight (8) fuse protected AC outputs.
Eight (8) fuse protected DC outputs DC outputs are filtered and electronically regulated.
Output fuses are rated @ 3.5 amp. Main fuses are rated @ 5 amp
115VAC 50/60Hz, 1.52 amp input Surge suppression.
AC/DC power LED indicator Power ON/OFF switch.
Unit maintains camera synchronization.
Lifetime Warranty
Enclosure
Dimensions:
15.5"H x 12"W x 4.5"D
1/2" and 3/4" combination knockouts
Login or Call
for Pricing.
Special Order Item.
24VAC CCTV PWR.SUP.16 CAM. 8 A
Features/Specifications CE Approved 24VAC or 28VAC
selectable output 8 amp @ 24VAC or 7 amp @ 28VAC
(200VA) supply current Sixteen (16) fuse protected outputs
Output fuses are rated @ 3.5 amp115VAC 50/60Hz, 1.9 amp input
Surge suppression AC power LED indicators Power On/Off switch
Unit maintains camera synchronization Lifetime Warranty
Enclosure:
Dimensions:
8.5"H x 7.5"W x 3.5"D
1/2" and 3/4" combination knockouts
Applications:
24VAC or 28VAC power for CCTV
cameras, heaters
and other video accessories.
Specification Sheet: AX-ALTV2416.pdf
Login or Call
for Pricing.
Qty: ~2
Normal Stocking Item.
24VAC 16 CAM 25AMP
Model ALTV2416600 provides 24VAC or 28VAC
distributed via sixteen (16) fuse protected outputs.
Agency Listings CE Approved.
Features/Specifications
24VAC or 28VAC selectable output
28 amp @ 24VAC or 25 amp @ 28VAC (700VA) supply current.
Sixteen (16) fuse protected outputs.Output fuses are rated
@ 3.5 amp 115VAC 50/60Hz, 5.4 amp input.
Surge suppression AC power LED indicator
Illuminated Power Disconnect Circuit Breaker with manual reset
Unit maintains camera synchronization.
Lifetime Warranty
Enclosure
Dimensions:
13.5"H x 13"W x 3.25"D.
1/2" and 3/4" combination knockouts
Applications
24VAC or 28VAC power for CCTV cameras, heaters,
and other video accessories
Login or Call
for Pricing.
Qty: ~1
Special Order Item.
24VAC 16 CAM 25AMP UL LISTED
Login or Call
for Pricing.
Normal Stocking Item.
24VAC CCTV 16 OUTPUT P.S.
Model ALTV2416CB provides 24VAC or 28VAC distributed via
sixteen (16) PTC protected outputs. ALTV2416CB220 is a 220VAC
Input version of this unit
Agency Listings
CE Approved
Features/Specifications
24VAC or 28VAC selectable output
8 amp @ 24VAC or 7 amp @ 28VAC (200VA) supply current.
Sixteen (16) PTC protected outputs Output PTCs are rated @ 2.5 amp.
115VAC 50/60Hz, 1.9 amp input Surge suppression.
AC power LED indicators Power On/Off switch.
Unit maintains camera synchronization.
Lifetime Warranty
Enclosure
Dimensions:
8.5"H x 7.5"W x 3.5"D
1/2" and 3/4" combination knockouts
Applications
24VAC or 28VAC power for CCTV cameras, heaters,
and other video accessories
Login or Call
for Pricing.
Special Order Item.
14.5 AMP, 32 FUSED OUTPUT P.S.
Login or Call
for Pricing.
Clearance Item
(call to verify pricing
and availability)
24 VAC 4 CAM POWER SUPPLY
Model ALTV244 provides 24VAC or 28VAC distributed via
four (4) fuse protected outputs.
Agency Listings
CE Approved.
Features/Specifications
24VAC or 28VAC selectable output
4 amp @ 24VAC or 3.5 amp @ 28VAC (100VA) supply current.
Four (4) fuse protected outputs.
Output fuses are rated @ 3.5 amp 115VAC 50/60Hz, .9 amp input.
Surge suppression AC power LED indicator Power On/Off switch
Unit maintains camera synchronization.
Lifetime Warranty
Enclosure
Dimensions:
8.5"H x 7.5"W x 3.5"D.
1/2" and 3/4" combination knockouts
Applications
24VAC or 28VAC power for CCTV cameras, heaters
and other video accessories.
Login or Call
for Pricing.
Qty: ~3
Normal Stocking Item.
24VAC CCTV PWR.SUP. 8 CAM. 4 A
Model ALTV248 provides 24VAC or 28VAC distributed via eight (8) fuse
protected outputs.
ALTV248220 is a 220VAC input
version of this unit.
Agency Listings
CE Approved.
Features/Specifications
24VAC or 28VAC selectable output
4 amp @ 24VAC or 3.5 amp @ 28VAC (100VA) supply current.
Eight (8) fuse protected outputs.Output fuses are rated @ 3.5 amp
115VAC 50/60Hz, .9 amp input.Surge suppression
AC power LED indicator. Power On/Off switch
Unit maintains camera synchronization.
Lifetime Warranty
Enclosure
Dimensions:
8.5"H x 7.5"W x 3.5"D
1/2" and 3/4" combination knockouts
Applications
24VAC or 28VAC power for
CCTV cameras, heaters and
other video accessories
Login or Call
for Pricing.
Qty: ~2
Normal Stocking Item.
24VAC 7A 8CH CCTV PWR SPLY
Model ALTV248175UL provides 24VAC or 28VAC distributed via
eight (8) fuse protected outputs
Agency Listings
UL Listed for Commercial CCTV Equipment (UL2044),
CUL Listed - CSA Standard C22.2 No.1-98, Audio, Video
and Similar Equipment. File# E148639. CE Approved.
Features/Specifications
24VAC or 28VAC selectable output
7 amp @ 24VAC or 6.25 amp @ 28VAC (175VA) supply current.
Eight (8) fuse protected outputs.Output fuses are rated @ 3.5 amp
115VAC 50/60Hz, 1.73 amp input. Surge suppression
AC power LED indicator. Illuminated Power Disconnect Circuit Breaker with manual reset
Unit maintains camera synchronization.
Lifetime Warranty
Enclosure
Dimensions:
12.25"H x 7.25"W x 4.5"D.
1/2" and 3/4" combination knockouts
Applications
24VAC or 28VAC power for CCTV cameras, heaters,
and other video accessories
Login or Call
for Pricing.
Normal Stocking Item.
24VAC 14A 8CH PWR SUPPLY
Model ALTV248300 provides 24VAC
or 28VAC distributed via
eight (8) fuse protected outputs.
Features/Specifications
24VAC or 28VAC selectable output
14 amp @ 24VAC or 12.5 amp @
28VAC (350VA) supply current.
Eight (8) fuse protected outputs.
Output fuses are rated @ 3.5 amp.
115VAC 50/60Hz, 2.7 amp input.
Surge suppression AC power
LED indicator.
Illuminated Power Disconnect Circuit Breaker with manual reset
Unit maintains camera synchronization.
Lifetime Warranty
Enclosure
Dimensions:
12.25"H x 7.25"W x 4.5"D
1/2" and 3/4" combination knockouts
Applications
24VAC or 28VAC power for CCTV cameras, heaters, and
other video accessories
Login or Call
for Pricing.
Normal Stocking Item.
8 CAM 25 AMP UL POWER SUPPLY
Agency Listings
UL Listed for Commercial CCTV Equipment (UL2044)
CUL Listed - CSA Standard C22.2 No.1-98, Audio, Video
and Similar Equipment. File# E148639. CE Approved.
Features/Specifications
24VAC or 28VAC selectable output.25 amp @ 24VAC
(600VA) or 20 amp @ 28VAC (560VA) supply current.
Eight (8) fuse protected outputs.Output fuses are
rated @ 3.5 amp. 115VAC 50/60Hz, 5.4 amp input.
Surge suppression. AC power LED indicator.
Illuminated Power Disconnect Circuit Breaker
with manual reset.Unit maintains camera synchronization.
Lifetime Warranty
Enclosure
Dimensions: 13.5"H x 13"W x 3.25"
1/2" and 3/4" combination knockouts.
Applications:
24VAC or 28VAC power for CCTV cameras
heaters, and other video accessories
Login or Call
for Pricing.
Special Order Item.
6-15VDC 4 WALLMOUNT 4 OUTPUT
6-15VDC selectable output. 4 amp supply current. Four 4 fuse protected Class 2 Rated power limited outputs. Output fuses are rated 3.5 amp. 115VAC 50/60Hz, .9 amp input.
Filtered and electronically regulated outputs. Short circuit and thermal overload protection. AC power LED indicator. Illuminated Power Disconnect Circuit Breaker with manual reset. Unit maintains camera synchronization.
Dimensions: 8.5"H x 7.5"W x 3.5"D. 1/2" and 3/4" combination knockouts 6-15VDC power for CCTV cameras, heaters, and other video accessories.
Login or Call
for Pricing.
Special Order Item.
6-15VDC 16 OUTPUTS 6AMPS UL
6-15VDC selectable output.
6 amp supply current.
Sixteen (16) fuse protected outputs.
Output fuses are rated @ 3.5 amp.
115VAC 50/60Hz, 1.5 amp input.
Filtered and electronically regulated outputs.
Short circuit and thermal overload protection.
AC power LED indicator.
Illuminated Power Disconnect Circuit Breaker with manual reset.
Unit maintains camera synchronization
Login or Call
for Pricing.
Special Order Item.
6 TO 15 DC 8 CAM P.S.
Model ALTV615DC8UL provides 6-15VDC distributed via
eight (8) fuse protected outputs.
Agency Listings
UL Listed for Commercial CCTV Equipment (UL2044)
CUL Listed - CSA Standard C22.2 No.1-98, Audio, Video and Similar Equipment.
File# E148639.CE Approved
Features/Specifications
6-15VDC selectable output 4 amp total supply current
Eight (8) fuse protected Class 2 Rated power limited outputs.
Output fuses are rated @ 3.5 amp.115VAC 50/60Hz, .9 amp input
Filtered and electronically regulated outputs
Short circuit and thermal overload protection AC power LED indicator.
Power On/Off switch Unit maintains camera synchronization.
Lifetime Warranty
Enclosure
Dimensions:
13.5"H x 13"W x 3.25"D.
1/2" and 3/4" combination knockouts
Applications
6-15VDC power for CCTV cameras, heaters,
and other video accessories.
Login or Call
for Pricing.
Qty: ~2
Special Order Item.
4 CH EVENT TIMER IN ENCLOSURE
12 to 24 volts AC or DC operation
Standby current: 20mA with relays off combined with 40mA for each
relay on.
Four (4) Form “C" relay contacts are rated 10 amp @120VAC/28VDC.
EE Prom memory protects against loss of programming due to
power failure.
Accurate crystal controlled clock (DC operation).
Momentary and/or Latching Events.
254 individually programmed daily/weekly events.
Block programming capacity can accommodate a total of 1778 events
per week.
254 programmable Holiday events.
“First man in" option.
Alphanumeric LCD display simplifies programming.
Standard or Daylight Savings Time settings.
Automatic compensation for leap year.
Each relay operates independently.
Built-in charger for 12VDC sealed lead acid or gel type batteries
(Max charge current 300mA).
Lithium battery backup maintains clock.
User friendly keyboard programming.
Specification Sheet: AX-AT4.pdf
Login or Call
for Pricing.
Special Order Item.
3.5 AMP FUSE FOR ALTRONIX ALTV
Features/Specifications
3.5 amp fuse (3 AG)
.25" fuse
Fast blow
Quantity 100
Login or Call
for Pricing.
Qty: ~1
Normal Stocking Item.
LOW POWER DISCONNECT MODULE
The LPD low power disconnect
module is the convenient way to
add a low battery or low power
disconnect feature to any power
supply rated up to 8 amp. Threshold
is adjustable for added flexibility
Features/Specifications
Low voltage cutoff:
12VDC-10.5 volts (+/-.3 volts)
24VDC-20 volts (+/- .3 volts).
Restore voltage threshold:
12VDC-11.5 volts (+/-.3 volts)
24VDC-23 volts (+/- .3 volts).
12VDC or 24VDC input.
Lifetime Warranty.
Board
Dimensions (approximate):
2.2"W x 2.75"L x 1"H
Login or Call
for Pricing.
Qty: ~2
Special Order Item.
| Item # | Description | Price | Cart |
|---|
SAME AS 1024ULXPD8 BUT WITH CI
Model AL1024ULXPD8CB power supply/charger converts a 115VAC 60Hz input,
to 24VDC @ 10 amp supply current for Access Control application, 24VDC
@ 8 amp supply current with 10 amp during alarm for Fire Alarm applications distributed via
eight (8) PTC protected Class 2 Rated outputs. Model AL1024ULXPD8 is a fuse
protected version of this unit.
Agency Listings UL Listed for Access Control Systems
(UL294),Power Supplies for Fire Protective Signaling
Systems (UL1481) CUL Listed - CSA Standard
C22.2 No.205-M1983, Signal Equipment File# S470. NFPA 72 Compliant
Features/Specifications
24VDC output 10 amp of continuous supply current for Access Control applications
8 amp of continuous supply current 10 amp during alarm for Fire Alarm applications
Class 2 Rated power limited outputs Eight (8) PTC protected outputs
PTCs are rated @ 2.5 amp.115VAC 60Hz, 4.4 amp input
Filtered and electronically regulated outputs Short circuit and thermal overload protection
Built-in charger for sealed lead acid or gel type battery backup Maximum charge
current .7 amp Zero voltage drop upon transfer to battery backup
AC input and DC output LED indicators
AC fail supervision (form "C" contact rated @ 1 amp 28VDC)
Low battery and battery presence
supervision
(form "C" contact rated @ 1 amp 28VDC)
Lifetime Warranty
Enclosure
Accommodates up to two (2) 12VDC/12AH batteries
Dimensions:
15.5"H x 12"W x 4.5"D
1/2" and 3/4" combination knockouts
You must be logged in to request more information about products.
Login or Call
for Pricing.
Special Order Item.
6/12 VDC 5AMP TIMER
Mandated Daylight Saving Time Change
All updated models have a yellow dot on the packaging. Microchips to
upgrade timers in the field or inventory are available at your distributor.
Overview:
The 6030 programmable timer is suitable for most functions that require a
timed operation e.g. Applications,Siren/Bell Cut Off Module, Dialer Delay, Guard Tour
Supervisory Timer, Pulser/Flasher
Features/Specifications
6VDC or 12VDC selectable operation
Quick and extremely accurate time range adjustment from 1 second to 60 minutes.
LED indicates relay is energized. Form "C" relay contacts are 5 amp at 120VAC/28VDC.
Current draw stand by 3mA relay energizes at 75mA. Repeat (flasher/pulse) mode.
Relay activates at the end of the timing cycle.
Lifetime Warranty
Board:
Dimensions (approximate):
2.5"W x 3"L x 0.75"
You must be logged in to request more information about products.
Login or Call
for Pricing.
Qty: ~4
Normal Stocking Item.
FULL FUNC.TIMER 24VDC
Mandated Daylight Saving Time Change.
All updated models have a yellow dot on the packaging
Microchips to upgrade timers in the field or inventory are
available at your distributor. Model 6062 programmable timer
is suitable for many functions that require a timed operation e.g.
Access Control Applications, Siren/Bell Cut Off Module,
Dialer Delay, Guard Tour Supervisory Timer, etc. Some optional
functions include: One Shot, Delayed Release, Delayed
Operate, Delayed Pulse and Pulser/Flasher. A new feature
has been added which provides a momentary relay activation
at the end of a desired timing cycle. This feature eliminates
the need for having to use two (2) timers to achieve this
function.Another new feature will cancel (interrupt) timing
cycle and reset timer if desired.
Features/Specifications
12VDC or 24VDC selectable operation.
Quick and extremely accurate time range adjustment
from 1 sec. to 60 min.LED indicates relay is energized.
Form "C" relay contacts are 8 AMP at 120VAC/28VDC.
Current Draw: Stand-by 3mA, Relay Energized 40mA.
Triggers via positive DC (+) voltage, dry contact closure,
or removal of contact closure.
Selectable relay activation at the start or end of the timing cycle.
One (1) second momentary relay activation at the end of the
timing cycle (eliminates the need to use two (2) timers for this
function). Built-in reset feature which cancels timing cycle.
Repeat (pulser/flasher) mode.
Snap Trac compatible (order Altronix model# ST3)
DIN Rail Mount version available (order Altronix model# DTMR1).
Lifetime Warranty
Board
Dimensions (approximate): 2.5"W x 3"L x 0.75"H
You must be logged in to request more information about products.
Login or Call
for Pricing.
Qty: ~11
Normal Stocking Item.
MULTI PURPOSE TIMER 4 HOUR
Mandated Daylight Saving Time Change
All updated models have a yellow dot on the packaging. Microchips to upgrade timers in the field
or inventory are available at your distributor.
Model 6062 programmable timer is suitable for many functions that require a timed operation e.g.
Access Control Applications, Siren/Bell Cut Off Module, Dialer Delay, Guard Tour Supervisory Timer, etc.
Some optional functions include: One Shot, Delayed Release, Delayed Operate, Delayed Pulse and Pulser/Flasher.
A new feature has been added which provides a momentary relay activation at the end of a desired
timing cycle. This feature eliminates the need for having to use two (2) timers to achieve this function.
Another new feature will cancel (interrupt) timing cycle and reset timer if desired.
Features/Specifications
12VDC or 24VDC selectable operation
Quick and extremely accurate time range adjustment from 1 sec. to 60 min
LED indicates relay is energized. Form "C" relay contacts are 8 AMP at 120VAC/28VDC.
Current Draw: Stand-by 3mA, Relay Energized 40mA, Triggers via positive DC (+) voltage, dry contact closure
or removal of contact closure. Selectable relay activation at the start or end of the timing cycle
One (1) second momentary relay activation at the end of the timing cycle
(eliminates the need to use two (2) timers for this function). Built-in reset feature which cancels timing cycle.
Repeat (pulser/flasher) mode. Snap Trac compatible (order Altronix model# ST3)
DIN Rail Mount version available (order Altronix model# DTMR1).
Lifetime Warranty
Board
Dimensions (approximate):
2.5"W x 3"L x 0.75"H
You must be logged in to request more information about products.
Login or Call
for Pricing.
Qty: ~2
Normal Stocking Item.
PWR SUP CHARGER .75AMPS @12VDC
12VDC power limited output.
75A continuous supply current @ 12.5 to 13.9VDC.
Filtered and electronically regulated outputs.
16.5VAC/20VA input from UL Listed, Class 2 transformer.
Short circuit and thermal overload protection.
Built-in charger for sealed lead acid or gel type battery backup.
Maximum charge current .5 amp.
Automatic switch to stand-by battery when AC fails.
AC input and DC output LED indicators.
Low battery and AC Fail supervision form “C" contacts (1 amp @ 28VDC).
Lifetime Warranty.
Specification Sheet: AX-AL100UL.pdf
You must be logged in to request more information about products.
Login or Call
for Pricing.
Qty: ~1
Normal Stocking Item.
12VDC 10AMP UL LISTED POWER SU
You must be logged in to request more information about products.
Login or Call
for Pricing.
Special Order Item.
10 AMP POWER SUPPLY CHARGER 24
10 AMP Power Supply Charger, 24VDC output, 115VAC 60Hz 4.4 amp input, w/ multi output access power controller
Specification Sheet: AX-AL1024ULAMCB.pdf
You must be logged in to request more information about products.
Login or Call
for Pricing.
Special Order Item.
REPLACEMENT POWER BOARD FOR AL
24VDC output.
8 amp of continuous supply current, 10 amp during alarm.
115VAC 60Hz, 4.4 amp input.
Filtered and electronically regulated outputs.
Short circuit and thermal overload protection.
Built-in charger for sealed lead acid or gel type battery backup.
Maximum charge current 3.6 amp.
Zero voltage drop upon transfer to battery backup.
AC input and DC output LED indicators.
AC fail supervision (form "C" contact rated @ 1 amp 28VDC).
Low battery and battery presence supervision
(form "C" contact rated @ 1 amp 28VDC).
Specification Sheet: AX-AL1024ULXB.pdf
You must be logged in to request more information about products.
Login or Call
for Pricing.
Special Order Item.
12/24 VDS ACCESS FACP SUP
Model AL175UL power supply/charger converts 115VAC 60Hz
input, into two (2) PTC protected 12VDC or 24VDC
@ 1.75 amp Class 2 Rated power limited
supply current outputs.
Agency Listings
UL Listed for Access Control Systems (UL294)
CUL Listed - CSA Standard C22.2 No.205-M1983
Signal Equipment. File# BP5864.
CSFM - California State Fire Marshal Approved.
File# 7315-1335:106. MEA - NYC Department
of Buildings Approved. NFPA 101 (Life Safety).
Features/Specifications
12VDC or 24VDC selectable output.
1.75 amp of continuous supply current.
Two (2) PTC protected Class 2 Rated power limited outputs.
115VAC 60Hz, .6 amp.
Filtered and electronically regulated outputs.
Dry Trigger Input. Short circuit and thermal overload protection.
Built-in charger for sealed lead acid or gel type battery backup.
Maximum charge current .4 amp.
Automatic switch to stand-by battery when AC fails.
AC fail supervision (form "C" contact rated @ 1 amp 28VDC).
Dry trigger output supervision (form "C" contact rated @ 1 amp 28VDC).
AC input and DC output LED indicators Lifetime Warranty
Enclosure
Dimensions:
8.5"H x 7.5"W x 3.5"D.
1/2" and 3/4" combination knockouts.
You must be logged in to request more information about products.
Login or Call
for Pricing.
Qty: ~3
Normal Stocking Item.
POWER SUPPLY/CHARGER THAT CONV
12VDC output.
1.75 amp of continuous supply current.
Class 2 Rated power limited output.
24VAC/40V amp. Use UL listed plug-in transformer.
Filtered and electronically regulated outputs.
Short circuit and thermal overload protection.
Built-in charger for sealed lead acid or gel type battery backup.
Maximum charge current .4 amp.
Automatic switch to stand-by battery when AC fails.
Zero voltage drop upon transfer to battery backup.
AC fail supervision (form "C" contact rated @ 1 amp 28VDC).
Low battery supervision (form "C" contact rated @ 1 amp 28VDC).
AC input and DC output LED indicators.
Specification Sheet: AX-AL201UL.pdf
You must be logged in to request more information about products.
Login or Call
for Pricing.
Special Order Item.
5 OUTPUT UL POWER SUPPLY 12/24
Model AL300ULM is specifically designed for use with access control systems and accessories.
This unit converts a 115VAC 60Hz input into five (5) PTC protected Class 2 Rated power limited outputs
rated @ 2 amp each, with an output current of 12VDC or 24VDC @ 2.5 amp total.
Model AL300ULMR is a Red Cabinet version of this product.
Agency Listings
UL Listed for Access Control Systems (UL294)
Power Supplies for use with Burglar Alarm Systems (UL603) Hospital Signaling and Nurse Call Equipment (UL1069)
Power Supplies for Fire Protective Signaling Systems (UL1481) CUL Listed - CSA Standard C22.2 No.205-M1983, Signal Equipment
File# S4707.CSFM -California State Fire Marshal Approved
File# 7315-1335:100. MEA - NYC Department of Buildings Approved. File# 168-92-E Vol. VI.
Features/Specifications
Power Supply/Charger 12VDC or 24VDC selectable output 2.5 amp supply current.
115VAC 60Hz, 1.45 amp input. Filtered and electronically regulated outputs
Short circuit and thermal overload protection.
Built-in charger for sealed lead acid or gel type battery backup Maximum charge current .7 amp
Zero voltage drop upon transfer to battery backup. AC input and DC output LED indicators.
AC fail supervision (form "C" contact rated @ 1 amp 28VDC).
Low battery and battery presence supervision (form "C" contact rated @ 1 amp 28VDC).
Lifetime Warranty
Multi-Output Module:
Five (5) PTC protected outputs.Class 2 Rated power limited outputs.
Current limit is 2 amp @ 12VDC or 24VDC per output. Provides power for Fail Safe and/or Fail Secure locking devices
Fire Alarm Panel or Access Control System trigger inputs NO or NC supervised trigger input and
polarity reversal trigger input (.4 amp draw from FACP) Lifetime Warranty.
Enclosure
Accommodates up to two (2) 12VDC/7AH batteries
Dimensions:
13.5"H x 13"W x 3.25"D
1/2" and 3/4" combination knockouts
You must be logged in to request more information about products.
Login or Call
for Pricing.
Special Order Item.
1 OUTPUT UL POWER SUPPLY 12/24
Model AL300ULXR power supply/charger converts a
115VAC 60Hz input, to a 2.5 amp of continuous supply
current @ 12VDC or 24VDC non-power limited output. Red Enclosure
Agency Listings
UL Listed for Access Control Systems (UL294)
Power Supplies for use with Burglar Alarm Systems (UL603),
Hospital Signaling and Nurse Call Equipment (UL1069),
Power Supplies for Fire Protective Signaling Systems (UL1481),
CUL Listed - CSA Standard C22.2 No.205-M1983, Signal Equipment.
File# S4707.CSFM - California State Fire Marshal Approved
File# 7315-1335:100.MEA - NYC Department of Buildings Approved
File# 168-92-E Vol. VI. NFPA 72 Compliant
Features/Specifications
12VDC or 24VDC selectable output
2.5 amp of continuous supply current output
Class 2 Rated power limited output.
115VAC 60Hz, 1.45 amp inputFiltered and
electronically regulated outputs
Short circuit and thermal overload protection
Built-in charger for sealed lead acid or gel type battery backup
Maximum charge current .7 amp. Zero voltage drop upon transfer to battery backup
AC input and DC output LED indicators AC fail supervision
(form "C" contact rated @ 1 amp 28VDC)
Low battery and battery presence supervision
(form "C" contact rated @ 1 amp 28VDC) Lifetime Warranty
Enclosure
Accommodates up to two (2) 12VDC/7AH batteries.
Dimensions:
13.5"H x 13"W x 3.25"D
1/2" and 3/4" combination knockouts
You must be logged in to request more information about products.
Login or Call
for Pricing.
Special Order Item.
12/24VDC 4A SUPPLY
Model AL400UL power supply converts a 115VAC
60Hz input, to 12VDC @ 4 amp or 24VDC @ 3 amp
of continuous supply current Class 2 Rated power
limited output.
Agency Listings
UL Listed for Access Control Systems (UL294)
Burglar Alarms Systems (UL603)
Hospital Signaling and Nurse Call Equipment (UL1069)
Power Supplies for Fire Protective Signaling Systems
(UL1481) ULC Listed File # S4707.
CSFM - California State Fire Marshal Approved.
File # 7315-1335:100.
MEA - NYC Department of Buildings Approved.
File # 168-92-E NFPA 72 Compliant.
Features/Specifications
12VDC or 24VDC selectable output.
4 amp @ 12VDC or 3 amp @ 24VDC of continuous
supply current output. Class 2 Rated power limited output.
115VAC 60Hz, 1.45 amp input.Filtered and
electronically regulated outputs.
Short circuit and thermal overload protection.
Built-in charger for sealed lead acid or gel type
battery backup.Maximum charge current .7 amp.
Zero voltage dropupon transfer to battery backup.
AC input and DC output LED indicators.
AC fail supervision (form "C" contact rated @ 1 amp
28VDC). Low battery supervision (form "C" contact rated
@ 1 amp 28VDC).Lifetime Warranty.
Enclosure
Dimensions: 12.25"H x 7.75"W x 4.5"D.
1/2 and 3/4 combination knockouts.
Similar Altronix Products AL400ULX 4 amp
@ 12VDC or 3 amp @ 24VDC. Larger Enclosure.
You must be logged in to request more information about products.
Login or Call
for Pricing.
Special Order Item.
UL/ADA 4AMP SUPPLY
Model AL400ULADA is specifically designed to interface between the FACP and indicating devices
to supply the additional power needed for a Fire Alarm System to conform to ADA regulations. For
both retrofit and new installations, the model AL400ULADA Fire Alarm Indicating Circuit Power Supply
will save time and expense, while efficiently providing the power needed to drive additional horns,
strobes and bells required under the ADA.
This unit allows compatibility between 12VDC fire alarm control panels and 24VDC ADA strobes
and other signaling devices. The AL400ULADA comes complete with power supply, enclosure,
transformer and ample room for standby batteries. On-board supervisory relays are incorporated
for remote status reporting and trouble indications at the fire panel.
Agency Listings
UL Listed Control Units and Accessories for Fire Alarm Systems (UL864).
File# S5075. CSFM - California State Fire Marshal Approved
File# 7315-1335:101. MEA - NYC Department of Buildings Approved.
Features/Specifications
12VDC or 24VDC selectable output 4 amp max total alarm current
115VAC 60Hz., 1.45 amp. Interfaces with one (1) FACP Class B indicating circuit
Compatible with 12VDC or 24VDC fire panels Short circuit and thermal overload protection.
Built-in charger for sealed lead acid or gel type battery backup
Maximum charge current .7 amp. Zero voltage drop upon transfer to battery backup.
AC input and DC output LED indicators. AC fail supervision (form "C" contact rated @ 1 amp 28VDC).
Low battery and battery presence supervision (form "C" contact rated @ 1 amp 28VDC).
Lifetime Warranty
Enclosure
Accommodates up to two (2) 12VDC/12AH batteries
Dimensions:
15.5"H x 12"W x 4.5"D
1/2" and 3/4" combination knockouts
You must be logged in to request more information about products.
Login or Call
for Pricing.
Qty: ~2
Normal Stocking Item.
POWER SUPPLY/CHARGER W/MULTI-O
Features/Specifications
Power Supply/Charger:12VDC or 24VDC
selectable output. 4 amp @ 12VDC or 3 amp
@ 24VDC of continuous supply current output.
Class 2 Rated power limited output.
115VAC 60Hz, 1.9 amp input.
Filtered and electronically regulated outputs.
Short circuit and thermal overload protection.
Built-in charger for sealed lead acid or gel type battery backup.
Maximum charge current .7 amp.
Zero voltage drop upon transfer to battery backup.
AC input and DC output LED indicators.
AC fail supervision (form "C" contact rated @ 1 amp 28VDC).
Low battery and battery presence supervision
(form "C" contact rated @ 1 amp 28VDC).
Lifetime Warranty.
Access Power Controller:
Eight (8) Access Control System outputs.
Eight (8) fuse protected Fail-Safe and/or Fail-Secure
12VDC or 24VDC power outputs.
Any power output may be converted to dry form "C"
relay output.Eight (8) fuse protected 12VDC
auxiliary power outputs (unswitched).
Red LEDs indicate outputs are triggered (relays energized).
Eight (8) Access Control System trigger inputs.
Eight (8) normally open (NO) inputs.Eight (8) open
collector inputs.Any combination of the above.
Fire Alarm Disconnect:
Fire Alarm Disconnect (latching or non-latching) is individually
selectable for any or all of the eight (8) outputs.
Normally open (NO) or normally closed (NC) dry contact input.
Polarity reversal input FACP signaling circuit.
Fire Alarm trigger LED indicates that the Fire
Alarm Disconnect has been activated.
Fire Alarm output relay for triggering auxiliary reporting
devices (form "C" contact rated @ 1 amp 28VDC).
Lifetime Warranty.
Enclosure
Accommodates up to two (2) 12VDC/12AH batteries.
Dimensions: 15.5"H x 12"W x 4.5"D
1/2" and 3/4" combination knockouts
You must be logged in to request more information about products.
Login or Call
for Pricing.
Special Order Item.
12 OR 24VDC BD ONLY
Model AL400ULB power supply/charger converts a 28VAC/100VA
input, to 12VDC @ 4 amp or 24VDC @ 3 amp of continuous
supply current output. Class 2 Rated power limited output.
Agency Listings
UL Recognized Component for Access Control Systems (UL294)
Power Supplies for use with Burglar Alarm Systems (UL603),
Power Supplies for Fire Protective Signaling Systems(UL1481).
File# S4707. NFPA 72 Compliant
Features/Specifications
12VDC or 24VDC selectable output
4 amp @ 12VDC or 3 amp @ 24VDC of continuous
supply current output.
Class 2 Rated Power limited output. 28VAC/175VA input.
Filtered and electronically regulated outputs
Short circuit and thermal overload protection.
Built-in charger for sealed lead acid or gel type battery backup
Maximum charge current .6 amp Zero voltage drop upon transfer to
battery backup. AC input and DC output LED indicators.
AC fail supervision (form "C" contact rated @ 1 amp 28VDC).
Low battery supervision (form "C" contact rated @ 1 amp 28VDC).
Lifetime Warranty
Board
Dimensions (approximate):
4.1"W x 7.1"L x 1.75"H
You must be logged in to request more information about products.
Login or Call
for Pricing.
Special Order Item.
12/24 VAC 4AMP 4 OUT FUSED
Model AL400ULPD4 power supply/charger converts a 115VAC 60Hz input, to a 4 amp of continuous supply
current @ 12VDC or 3 amp of continuous supply current
@ 24VDC distributed via four (4) fuse protected Class 2 Rated power limited outputs.
Model AL400ULPD4CB is a PTC protected version of this unit
Agency Listings
UL Listed for Access Control Systems (UL294),
Power Supplies for use with Burglar Alarm Systems (UL603),
Hospital Signaling and Nurse Call Equipment (UL1069), Power Supplies for Fire Protective Signaling Systems (UL1481)
CUL Listed - CSA Standard C22.2 No.205-M1983, Signal Equipment. File# S4707. NFPA 72 Compliant
Features/Specifications
12VDC or 24VDC selectable output
4 amp @ 12VDC or 3 amp @ 24VDC of continuous supply current output.
Four (4) fuse protected Class 2 Rated power limited outputs.
Fuses are rated @ 3.5 amp 115VAC 60Hz, 1.45 amp input.
Filtered and electronically regulated outputs Short circuit and thermal overload protection.
Built-in charger for sealed lead acid or gel type battery backup
Maximum charge current .7 amp Zero voltage drop upon transfer
to battery backup AC input and DC output LED indicators.
AC fail supervision (form "C" contact rated @ 1 amp 28VDC).
Low battery and battery presence supervision (form "C" contact rated
Lifetime Warranty
Enclosure
Accommodates up to two (2) 12VDC/7AH batteries
Dimensions:
13.5"H x 13"W x 3.25"D
1/2" and 3/4" combination knockouts
You must be logged in to request more information about products.
Login or Call
for Pricing.
Special Order Item.
12/24 VAC 4AMP 4 OUT W/CB
Model AL400ULPD4CB power supply/charger converts a 115VAC 60Hz input,
to a 4 amp of continuous supply current @ 12VDC or 3 amp of continuous supply
current @ 24VDC distributed via four (4) PTC protected Class 2 Rated power limited
outputs. Model AL400ULPD4 is a fuse protected version of this unit.
Agency Listings
UL Listed for Access Control Systems (UL294),
Power Supplies for use with Burglar Alarm Systems (UL603),
Hospital Signaling and Nurse Call Equipment (UL1069),
Power Supplies for Fire Protective Signaling Systems (UL1481),
CUL Listed - CSA Standard C22.2 No.205-M1983, Signal Equipment.
File# S4707.NFPA 72 Compliant
Features/Specifications
12VDC or 24VDC selectable output
4 amp @ 12VDC or 3 amp @ 24VDC of continuous supply current output.
Class 2 Rated power limited outputs.Four (4) PTC protected outputs.
PTCs are rated @ 2.5 amp.115VAC 60Hz, 1.45 amp input.
Filtered and electronically regulated outputs.Short circuit and thermal overload protection.
Built-in charger for sealed lead acid or gel type battery backup
Maximum charge current .7 amp.Zero voltage drop upon transfer to battery backup
AC input and DC output LED indicators.
AC fail supervision (form "C" contact rated @ 1 amp 28VDC)
Low battery and battery presence supervision
(form "C" contact rated @ 1 amp 28VDC)
Lifetime Warranty
Enclosure
Accommodates up to two (2) 12VDC/7AH batteries
Dimensions:
13.5"H x 13"W x 3.25"D
1/2" and 3/4" combination knockouts
You must be logged in to request more information about products.
Login or Call
for Pricing.
Special Order Item.
12/24VDC 4 AMP POWER SUPPLY
Model AL400ULPD8 power supply/charger converts a 115VAC 60Hz input, to a 4 amp of continuous supply current @ 12VDC or 3 amp of continuous supply current @ 24VDC distributed via eight (8) fuse protected Class 2 Rated power limited outputs. Model AL400ULPD8CB is a PTC protected version of this unit.
Agency Listings
UL Listed for Access Control Systems (UL294),
Power Supplies for use with Burglar Alarm Systems (UL603),
Hospital Signaling and Nurse Call Equipment (UL1069),
Power Supplies for Fire Protective Signaling Systems (UL1481),
CUL Listed - CSA Standard C22.2 No.205-M1983, Signal Equipment.
File# S4707.NFPA 72 Compliant
Features/Specifications
12VDC or 24VDC selectable output
4 amp @ 12VDC or 3 amp @ 24VDC of continuous supply current output.
Class 2 Rated power limited outputs Eight (8) fuse protected outputs.
Fuses are rated @ 3.5 amp 115VAC 60Hz, 1.45 amp input
Filtered and electronically regulated outputs Short circuit and thermal overload protection.
Built-in charger for sealed lead acid or gel type battery backup Maximum charge current .7 amp
Zero voltage drop upon transfer to battery backup. AC input and DC output LED indicators
AC fail supervision (form "C" contact rated @ 1 amp 28VDC).
Low battery and battery presence supervision (form "C" contact rated @ 1 amp 28VDC)
Lifetime Warranty
Enclosure
Accommodates up to two (2) 12VDC/7AH batteries
Dimensions:
13.5"H x 13"W x 3.25"D
1/2" and 3/4" combination knockouts
You must be logged in to request more information about products.
Login or Call
for Pricing.
Special Order Item.
UL 12/24VDC 4A SUPPLY
Features/Specifications 12VDC or 24VDC selectable output
4 amp @ 12VDC or 3 amp @ 24VDC of continuous supply
current output.Class 2 Rated power limited output.
115VAC 60Hz, 1.45 amp input.Filtered and
electronically regulated outputs. Short circuit and
thermal overload protection.
Built-in charger for sealed lead acid or gel type battery backup
Maximum charge current .7 amp Zero voltage drop
upon transfer to battery backup AC input and DC
output LED indicators AC fail supervision
(form "C" contact rated @ 1 amp 28VDC)
Low battery and battery presence supervision
(form "C" contact rated @ 1 amp 28VDC) Lifetime Warranty
Enclosure:
Accommodates up to two (2) 12VDC/7AH batteries
Dimensions:
13.5"H x 13"W x 3.25"D
1/2" and 3/4" combination knockouts
You must be logged in to request more information about products.
Login or Call
for Pricing.
Qty: ~2
Normal Stocking Item.
OFF-LINE SWITCHING POWER SUPPL
Model AL400ULXB power supply/charger converts a 115VAC 60Hz input,
to 12VDC @ 4 amp or 24VDC @ 3 amp of continuous supply current output.
Class 2 Rated power limited output.
Agency Listings
UL Recognized Component for Access Control Systems (UL294),
Power Supplies for use with Burglar Alarm Systems (UL603),
Hospital Signaling and Nurse Call Equipment (UL1069),
Power Supplies for Fire Protective Signaling Systems (UL1481)
File# S4707.NFPA 72 Compliant
Features/Specifications
12VDC or 24VDC selectable output
4 amp @ 12VDC or 3 amp @ 24VDC of continuous supply current output.
Class 2 Rated Power limited output.115VAC 60Hz, 1.45 amp input.
Filtered and electronically regulated outputs
Short circuit and thermal overload protection
Built-in charger for sealed lead acid or gel type battery backup
Maximum charge current .7 amp.Zero voltage drop upon transfer to battery backup
AC input and DC output LED indicators.
AC fail supervision (form "C" contact rated @ 1 amp 28VDC)
Low battery and battery presence supervision
(form "C" contact rated @ 1 amp 28VDC)
Lifetime Warranty
Board
Dimensions (approximate):
4.6"W x 7.5"L x 2.7"H
You must be logged in to request more information about products.
Login or Call
for Pricing.
Special Order Item.
12/24VAC 4AMP 4OUT W/CB
12/24VAC 4AMP 4OUT W/CB
You must be logged in to request more information about products.
Login or Call
for Pricing.
Special Order Item.
12/24VAC 4AMP 16OUT W CB
Model AL400ULXPD16 power supply/charger converts a 115VAC 60Hz input, to a 4 amp of continuous supply current @ 12VDC or 3 amp of continuous supply current @ 24VDC distributed
via sixteen (16) fuse protected Class 2 Rated power limited outputs. Model AL400ULXPD16CB is a PTC protected version of this unit.
Agency Listings
UL Listed for Access Control Systems
(UL294),
Power Supplies for use with Burglar Alarm Systems (UL603),Hospital Signaling and Nurse Call Equipment (UL1069), Power Supplies for Fire Protective Signaling Systems (UL1481),CUL Listed - CSA Standard C22.2 No.205-M1983, Signal Equipment.File# S4707.NFPA 72 Compliant
Features/Specifications
12VDC or 24VDC selectable output
4 amp @ 12VDC or 3 amp @ 24VDC of continuous supply current output.
Class 2 Rated power limited outputs.Sixteen (16) fuse protected outputs.
Fuses are rated @ 3.5 amp.115VAC 60Hz, 1.45 amp input.
Filtered and electronically regulated outputs Short circuit and thermal overload protection.
Built-in charger for sealed lead acid or gel type battery backup
Maximum charge current .7 amp Zero voltage drop upon transfer to battery backup.
AC input and DC output LED indicators.
AC fail supervision (form "C" contact rated @ 1 amp 28VDC).
Low battery and battery presence supervision (form "C" contact rated @ 1 amp 28VDC).
Lifetime Warranty
Enclosure
Accommodates up to two (2) 12VDC/12AH batteries.
Dimensions:
15.5"H x 12"W x 4.5"D
1/2" and 3/4" combination knockouts
You must be logged in to request more information about products.
Login or Call
for Pricing.
Special Order Item.
ACCESS POWER CONTROLLER w/POWE
Model AL600ULACM converts a 115VAC 60Hz input into eight (8) independently controlled
12VDC or 24VDC non power limited fuse protected Fail-Safe and/or Fail-Secure outputs with
a total of 6 amp continuous supply current.
The fire alarm disconnect feature enables emergency egress in the event the fire alarm system is
activated. It is individually selectable for any or all of the eight (8) outputs. Model AL600ULACMCB
is a PTC protected version of this unit.
Agency Listings
UL Listed for Access Control Systems (UL294) CUL Listed - CSA Standard C22.2 No.205-M1983,
Signal Equipment. File# BP6714. CSFM - California State Fire Marshal Approved
File# 7315-1335:106. MEA - NYC Department of Buildings Approved. File# 18-98-E Vol 3.
Features/Specifications
Power Supply/Charger: 12VDC or 24VDC selectable output 6 amp of continuous supply current
115VAC 60Hz, 1.9 amp input Filtered and electronically regulated outputs.
Short circuit and thermal overload protection. Maximum charge current .7 amp.
Zero voltage drop upon transfer to battery backup. AC input and DC output LED indicators.
AC fail supervision (form "C" contact rated @ 1 amp 28VDC). Low battery and battery presence supervision
(form "C" contact rated @ 1 amp 28VDC). Lifetime Warranty
Access Power Controller:
Eight (8) Access Control System outputs
Eight (8) fuse protected Fail-Safe and/or Fail-Secure 12VDC or 24VDC power outputs.
Eight (8) fuse protected 12VDC or 24VDC auxiliary power outputs (unswitched).
Red LEDs indicate outputs are triggered (relays energized).
Eight (8) Access Control System trigger inputs
Eight (8) normally open (NO) inputs.
Eight (8) open collector inputs Any combination of the above
Fire Alarm Disconnect:Fire Alarm Disconnect (latching or non-latching) is individually
selectable for any or all of the eight (8) outputs.Normally open (NO) or normally closed (NC) dry contact input.
Polarity reversal input FACP signaling circuit. Fire Alarm trigger LED indicates that the Fire Alarm Disconnect has been activated.
Fire Alarm output relay for triggering auxiliary reporting devices (form "C" contact rated @ 1 amp 28VDC).
Lifetime Warranty
Enclosure
Accommodates up to two (2) 12VDC/12AH batteries
Dimensions:
15.5"H x 12"W x 4.5"D
1/2" and 3/4" combination knockouts
You must be logged in to request more information about products.
Login or Call
for Pricing.
Special Order Item.
UL 12/24VDC 6A SUPPLY
Model AL600ULX power supply/charger converts a 115VAC 60Hz input, to a
6 amp of continuous
supply current @ 12VDC or 24VDC non-power limited output
Agency Listings
UL Listed for Access Control Systems (UL294) Power Supplies for Fire Protective
Signaling Systems (UL1481) CUL Listed - CSA Standard C22.2 No.205-M1983
Signal Equipment File# S4707.CSFM -California State Fire Marshal Approved
File# 7315-1335:104.MEA - NYC Department of Buildings Approved
File# 168-92-E Vol. III.FM Approved NFPA 72 Compliant
Features/Specifications
12VDC or 24VDC selectable output 6 amp of continuous supply current
115VAC 60Hz, 1.9 amp input Filtered and electronically regulated outputs.
Short circuit and thermal overload protection.
Built-in charger for sealed lead acid or gel type battery backup.
Maximum charge current .7 amp.Zero voltage drop upon transfer to battery
backup.
AC input and DC output LED indicators AC fail supervision
(form "C" contact rated @ 1 amp 28VDC).
Low battery and battery presence supervision
(form "C" contact rated @ 1 amp 28VDC).
Lifetime Warranty
Enclosure
Accommodates up to two (2) 12VDC/7AH batteries.
Dimensions:
13.5"H x 13"W x 3.25"D.
1/2" and 3/4" combination knockouts.
Specification Sheet: AX-AL600ULX.pdf
You must be logged in to request more information about products.
Login or Call
for Pricing.
Qty: ~2
Normal Stocking Item.
SAME AS AX-AL600UL/ADA BUTTEMP
Model AL602ULADA is an extremely cost effective 6.5 amp voltage regulated remote power supply/battery charger.
It maybe connected to any 24 volt Fire Alarm Control Panel (FACP).
Primary applications include Notification Appliance Circuit (NAC such as strobes and
horns) expansion support to meet ADA requirements. It also provides auxiliary power to support system accessories.
The unit delivers regulated and filtered 24 volt power to Class B or Class A NAC loop circuits. Additionally, a separate 1.0A auxiliary output with reset forfour (4)-wire smoke detectors is available. The 6.5 amp rated supply current can be divided between the four (4) outputs for powering
NAC devices.
Each output is rated at 2.5 amp max. and can be independently programmed for Steady, Temporal Code 3 or Strobe Synchronization. All outputs may be programmed for Input to Output Follower Mode (output will follow input. i.e. March Time Input, March Time Output).
An individual output of 4 amp is achieved by paralleling 2 outputs. In non alarm condition independent loop supervision for Class A and/or Class B FACP NAC circuits is provided. In the event of a loop trouble the FACP will be
Two (2)FACP signaling outputs can be employed and directed to control supervision and power delivery to any combination of the four (4) outputs.
The unit also features “Loop Output" trouble memory indication to help identify troublesome sporatic problems. Model is available in a largerenclosure
AL602ULADAJ.
Agency Listings
UL Listed Control Units and Accessories for Fire Alarm
Systems (UL864).File# S5075. CSFM California State Fire Marshal Approved File# 7315-1335:103. MEA –NYC Department of Buildings Approved FM Approved.
Features/Specifications
Power Supply/Charger 24VDC output.
6.5 amp max total alarm current
115VAC 60Hz. 1.45 amp.
Short circuit and thermal overload protection. Built-in charger for sealed lead acid or gel type battery backup.
Maximum charge current .7 amp. Zero voltage drop upon transfer to battery backup. AC input and DC output LED indicators. AC fail supervision (form "C" contact rated@ 1 amp 28VDC).
Low battery and battery presence supervision (form "C" contact rated @ 1 amp 28VDC).
Lifetime Warranty.
Logic Board:
Class 2 Rated power limited outputs. Two (2) Class A or two (2) Class B FACP inputs. Two (2) Class A or four (4) Class B Indicating Circuits.
Two (2) Class B outputs may be paralleled for more power on an indicating circuit. One (1) Aux. Power Output @ 1 amp supply current (w/Battery Back Up)
Signal Circuit Trouble Memory - facilitates quickly locating intermittent system trouble and eliminates costly and unnecessary service calls.
LEDs indicate a prior fault (short, open, ground) has occured on one or more signaling circuit outputs. 2-wire horn/strobe Sync mode allows audible notification appliances (horns) to be silenced while visual notification
appliances (strobes) continue to operate.
Horn/Strobe sync protocols include: Wheelock Gentex , System Sensor , Faraday, Amseco Temporal Code 3 Mode Steady Mode. Input to Output
Follower Mode (maintains synchronization of notification appliance circuits).March Time Compatible with 24VDC or 12VDC
fire panels Common Trouble inputs and outputs. Ground fault detection Lifetime Warranty
Enclosure
Accommodates up to two (2) 12VDC/12AH batteries.
Dimensions: 15.5"H x 12"W x 4.5"D.
1/2" and 3/4" combination knockouts.
You must be logged in to request more information about products.
Login or Call
for Pricing.
Normal Stocking Item.
NAC POWER EXTENDERS 6.5 AMP 12
NAC POWER EXTENDERS
6.5 AMP
12 OR 24VDC
TWO CLASS A OR FOUR CLASS B OUTPUTS
SYNC PROTOCOLS
• The AL602UL2ADA, AL802UL2ADA and AL1002UL2ADA are extremely cost
effective voltage regulated remote NAC Power Extenders. They may be
connected to any 12 or 24 volt Fire Alarm Control Panel (FACP). Primary
applications include Notification Appliance Circuit (NAC) expansion
(supports ADA requirements) and will provide auxiliary power to support
system accessories.
AL602UL2ADA
• 24VDC or 12VDC
rated @ 6.5 amp max.
• Two (2) Class A or
four (4) Class B outputs.
AL802UL2ADA
• 24VDC or 12VDC
rated @ 8 amp max.
• Two (2) Class A or
four (4) Class B outputs.
AL1002UL2ADA
• 24VDC rated
@ 10 amp max.
• Two (2) Class A or
four (4) Class B outputs
You must be logged in to request more information about products.
Login or Call
for Pricing.
Special Order Item.
PWR SUP BRD 6 12 24 V
The AL624 Linear Power Supply / Charger will convert a
low voltage AC input to a low voltage DC output. This
general purpose power supply has a wide range of
applications for access control, security and CCTV system
accessories that require additional power.
Specifications:
Selectable 6-12-24VDC power limited output.
1.2 amp continuous supply current at 6-12VDC.
750mA continuous supply current at 24VDC.
Filtered and electronically regulated output.
Built-in charger for sealed lead acid or gel type batteries.
Maximum charge current 300mA.
Automatic switchover to stand-by battery when AC Fails.
AC input and DC output LED indicators.
Thermal and short circuit protection with auto reset.
Fused battery protection (circuit breakers available).
Snap Trac compatible (order Altronix model #ST3).
DIN Rail mount version available
(order Altronix model #DPS1).
Includes battery leads.
Extremely compact design.
Board dimensions: 3"L x 2.5"W x 1.5"H
You must be logged in to request more information about products.
Login or Call
for Pricing.
Qty: ~10
Normal Stocking Item.
12/24 VDC 6.5 AMP W/4 CLASS A
Model AL642ULADA is an extremely cost effective 6.5 amp voltage regulated remote NAC Power Extender. It may be connected to any 24 volt Fire Alarm Control Panel (FACP). Primary applications include Notification Appliance Circuit (NAC) expansion (supports ADA requirements) and will provide auxiliary power to support system accessories.
The unit delivers regulated and filtered 24 volt power via up to eight (8) Class B, four (4) Class A or combination of Class B and Class A Notification Appliance Circuits. Additionally, the unit can supply up to 1 amp from continous AUX output and up to 1 amp from AC disconnected AUX ouput. The 6.5 amp rated supply current can be divided between the four (4) outputs for powering notification appliances and the AUX outputs.
Each output is rated at 2.5 amp max (total not to exceed 6.5 amp), and can be independently programmed for Steady, Temporal Code 3 or Strobe Synchronization. All outputs may be programmed for Input to Output Follower Mode (output will follow input. i.e. March Time Input, March Time Output). An individual output of 4 amp is achieved by paralleling 2 outputs.
In non-alarm condition units provide independent loop supervision for Class A and/or Class B FACP NAC circuits. In the event of a loop trouble the FACP will be notified via steered inputs (input 1 or input 2). In addition, there are common trouble output terminals (NC, C, NO) which are used to indicate general loop/system trouble.
A common trouble input is provided for optional NC (normally closed) devices to report trouble to the FACP. Two (2) FACP signaling outputs can be connected to power extender inputs. These inputs can then be directed to control supervision and power delivery to any combination of the four (4) outputs. The unit also feature “Loop Output" trouble memory indication to help identify troublesome sporatic loop problems.
Agency Listings
UL Listed Control Units and Accessories for Fire Alarm Systems (UL864).File# S5075.
CSFM - California State Fire Marshal Approved
File# 7315-1335:109.MEA - NYC Department of Buildings Approved FM Approved.
Features/Specifications
Power Supply/Charger 24VDC output 6.5 amp max total alarm current.
115VAC 60Hz., 3.2 amp.Short circuit and thermal overload protection.
Built-in charger for sealed lead acid or gel type battery backup
Maximum charge current .7 amp Zero voltage drop upon transfer to battery backup.
AC input and DC output LED indicators AC fail supervision (form "C" contact rated @ 1 amp 28VDC).
Low battery and battery presence supervision (form "C" contact rated @ 1 amp 28VDC) Lifetime Warranty
Logic Board:
Class 2 Rated power limited outputs.
Two (2) Class A or two (2) Class B FACP inputs
Two (2) NC dry contact trigger inputs
Four (4) Class A or four (4) Class B Indicating Circuits
Two (2) Class B outputs may be paralleled for more power on an indicating circuit.
One (1) Aux. Power Output @ 1 amp supply current (w/Battery Back Up).
One (1) Aux. Power Output @ 1 amp supply current (w/o Battery Back Up).
Signal Circuit Trouble Memory - facilitates quickly locating intermittent system trouble and eliminates costly and
unnecessary service calls. LEDs indicate a prior fault (short, open, ground) has occured on one or
more signaling circuit outputs.
2-wire horn/strobe Sync mode allows audible notification appliances (horns) to be silenced while visual notification
appliances (strobes) continue to operate Horn/Strobe sync protocols include: Wheelock , Gentex , System Sensor ,
Faraday, Amseco Temporal Code 3 Mode Steady Mode.
Input to Output Follower Mode (maintains synchronization of notification appliance circuits).
March Time Compatible with 24VDC or 12VDC fire panels Common Trouble inputs and outputs.
Ground fault detection Lifetime Warranty
Enclosure
Accommodates up to two (2) 12VDC/12AH batteries.
Dimensions:
18"H x 14.5"W x 4.625"D
1/2" and 3/4" combination knockouts
You must be logged in to request more information about products.
Login or Call
for Pricing.
Special Order Item.
AL-802ULADA BOARD ONLY
REPLACEMENT BOARD
You must be logged in to request more information about products.
Login or Call
for Pricing.
Normal Stocking Item.
UL/ADA 8 AMP SUPPLY
Model AL802ULADA is an extremely cost effective 8 amp voltage regulated remote power supply/battery charger. It may be connected to any 24 volt Fire Alarm Control Panel (FACP). Primary applications include Notification Appliance Circuit (NAC such as strobes and horns) expansion support to meet ADA requirements. It also provides auxiliary power to support system accessories.
The unit delivers regulated and filtered 24 volt power to Class B or Class A NAC loop circuits. Additionally, a separate 1.0A auxiliary output with reset for four (4)-wire smoke detectors is available. The 8 amp rated supply current can be divided between the four (4) outputs for powering NAC devices. Each output is rated at 2.5 amp max., and can be independently programmed for Steady, Temporal Code 3 or Strobe Synchronization.
All outputs may be programmed for Input to Output Follower Mode (output will follow input. i.e. March Time Input, March Time Output). An individual output of 4 amp is achieved by paralleling 2 outputs. In non-alarm condition independent loop supervision for Class A and/or Class B FACP NAC circuits is provided. In the event of a loop trouble the FACP will be notified via the steered input (input 1 or input 2).
In addition, there are common trouble output terminals (NC, C, NO) which are used to indicate general loop/system trouble. A common trouble input is provided for optional NC (normally closed) devices to report trouble to the FACP. Two (2) FACP signaling outputs can be employed and directed to control supervision and power delivery to any combination of the four (4) outputs.
The unit also features “Loop Output" trouble memory indication to help identify troublesome sporatic problems.
Model is available in a larger enclosure AL802ULADAJ.
Agency Listings
UL Listed Control Units and Accessories for Fire Alarm Systems (UL864).File# S5075.
CSFM - California State Fire Marshal Approved File# 7315-1335:107.
MEA - NYC Department of Buildings Approved.FM Approved.
Features/Specifications
Power Supply/Charger: 24VDC output 8 amp max total alarm current 115VAC 60Hz., 1.45 amp.
Short circuit and thermal overload protection Built-in charger for sealed lead acid or gel type battery backup.
Maximum charge current .7 amp Zero voltage drop upon transfer to battery backup.
AC input and DC output LED indicators AC fail supervision (form "C" contact rated @ 1 amp 28VDC).
Low battery and battery presence supervision (form "C" contact rated @ 1 amp 28VDC).
Lifetime Warranty
Logic Board:
Class 2 Rated power limited outputs.
Two (2) Class A or two (2) Class B FACP inputs
Two (2) NC dry contact trigger inputs
Two (2) Class A or four (4) Class B Indicating Circuit.
Two (2) Class B outputs may be paralleled for more power on an indicating circuit.
One (1) Aux. Power Output @ 1 amp supply current (w/Battery Back Up).
Signal Circuit Trouble Memory - facilitates quickly locating intermittent system trouble and eliminates costly and
unnecessary service calls. LEDs indicate a prior fault (short, open, ground) has occured on one or
more signaling circuit outputs.
2-wire horn/strobe Sync mode allows audible notification appliances (horns) to be silenced while visual notification
appliances (strobes) continue to operate.
Horn/Strobe sync protocols include: Wheelock , Gentex , System Sensor , Faraday, Amseco.
Temporal Code 3 Mode.Steady Mode Input to Output Follower Mode (maintains synchronization of notification appliance circuits).
March Time Compatible with 24VDC or 12VDC fire panels. Common Trouble inputs and outputs
Ground fault detection Lifetime Warranty
Enclosure
Accommodates up to two (2) 12VDC/12AH batteries
Dimensions:
15.5"H x 12"W x 4.5"D.
1/2" and 3/4" combination knockouts
You must be logged in to request more information about products.
Login or Call
for Pricing.
Special Order Item.
SIREN DRIVER 6-12 VDC
Model ALSD1 is a high output very low current draw dual channel
siren driver designed to work with
alarm panels with limited
current capability.
Features/Specifications
6VDC or 12VDC operation
Parallel or series speaker wiring:
113 db @ 10' @ 6 Volts - 8 Ohms
115 db @ 10' @ 6 Volts - 4 Ohms
116 db @ 10' @ 12 Volts - 8 Ohms
120 db @ 10' @ 12 Volts - 4 Ohms
Current draw range from .5 amp to 1.8 amp based on speaker
resistance and supply voltage. Two (2) channel operation - steady or yelp.
Very low current draw Lifetime Warranty
Board
Dimensions (approximate):
2.75"W x 1.1"L x 1.75"H
You must be logged in to request more information about products.
Login or Call
for Pricing.
Special Order Item.
LOW CURRENT DRAW DRIV
Model ALSD2 is a high output very
low current draw dual channel
siren driver designed to work with
alarm panels with limited
current capability.
Features/Specifications
6VDC or 12VDC operation
Parallel or series speaker wiring:
103 db @ 10 ft. @ 6V - 8 Ohms
105 db @ 10 ft. @ 6V - 4 Ohms
106 db @ 10 ft. @ 12V - 8 Ohms
111 db @ 10 ft. @ 12V - 4 Ohms
Current draw range from .3 amp to
1.22 amp based on speaker
resistance and supply voltage
Two (2) channel operation - steady
or yelp. Very low current draw
Lifetime Warranty
Board
Dimensions (approximate):
2.75"W x 1.1"L x 1.75"H
You must be logged in to request more information about products.
Login or Call
for Pricing.
Qty: ~54
Normal Stocking Item.
24VAC/12VDC POWER SUPPLY
Model ALTV1224C provides 12VDC @ 3.5 amp total supply current
distributred via eight (8) fuse protected outputs and 24VAC @ 3.5 amp total
supply current distributed via eight (8) fuse protected outputs.
Agency Listings
CE Approved.
Features/Specifications
12VDC and 24VAC output
3.5 amp @ 12VDC and 3.5 amp @ 24VAC totalsupply current output.
7 amp total output current Eight (8) fuse protected AC outputs.
Eight (8) fuse protected DC outputs DC outputs are filtered and electronically regulated.
Output fuses are rated @ 3.5 amp. Main fuses are rated @ 5 amp
115VAC 50/60Hz, 1.52 amp input Surge suppression.
AC/DC power LED indicator Power ON/OFF switch.
Unit maintains camera synchronization.
Lifetime Warranty
Enclosure
Dimensions:
15.5"H x 12"W x 4.5"D
1/2" and 3/4" combination knockouts
You must be logged in to request more information about products.
Login or Call
for Pricing.
Special Order Item.
24VAC CCTV PWR.SUP.16 CAM. 8 A
Features/Specifications CE Approved 24VAC or 28VAC
selectable output 8 amp @ 24VAC or 7 amp @ 28VAC
(200VA) supply current Sixteen (16) fuse protected outputs
Output fuses are rated @ 3.5 amp115VAC 50/60Hz, 1.9 amp input
Surge suppression AC power LED indicators Power On/Off switch
Unit maintains camera synchronization Lifetime Warranty
Enclosure:
Dimensions:
8.5"H x 7.5"W x 3.5"D
1/2" and 3/4" combination knockouts
Applications:
24VAC or 28VAC power for CCTV
cameras, heaters
and other video accessories.
Specification Sheet: AX-ALTV2416.pdf
You must be logged in to request more information about products.
Login or Call
for Pricing.
Qty: ~2
Normal Stocking Item.
24VAC 16 CAM 25AMP
Model ALTV2416600 provides 24VAC or 28VAC
distributed via sixteen (16) fuse protected outputs.
Agency Listings CE Approved.
Features/Specifications
24VAC or 28VAC selectable output
28 amp @ 24VAC or 25 amp @ 28VAC (700VA) supply current.
Sixteen (16) fuse protected outputs.Output fuses are rated
@ 3.5 amp 115VAC 50/60Hz, 5.4 amp input.
Surge suppression AC power LED indicator
Illuminated Power Disconnect Circuit Breaker with manual reset
Unit maintains camera synchronization.
Lifetime Warranty
Enclosure
Dimensions:
13.5"H x 13"W x 3.25"D.
1/2" and 3/4" combination knockouts
Applications
24VAC or 28VAC power for CCTV cameras, heaters,
and other video accessories
You must be logged in to request more information about products.
Login or Call
for Pricing.
Qty: ~1
Special Order Item.
24VAC 16 CAM 25AMP UL LISTED
You must be logged in to request more information about products.
Login or Call
for Pricing.
Normal Stocking Item.
24VAC CCTV 16 OUTPUT P.S.
Model ALTV2416CB provides 24VAC or 28VAC distributed via
sixteen (16) PTC protected outputs. ALTV2416CB220 is a 220VAC
Input version of this unit
Agency Listings
CE Approved
Features/Specifications
24VAC or 28VAC selectable output
8 amp @ 24VAC or 7 amp @ 28VAC (200VA) supply current.
Sixteen (16) PTC protected outputs Output PTCs are rated @ 2.5 amp.
115VAC 50/60Hz, 1.9 amp input Surge suppression.
AC power LED indicators Power On/Off switch.
Unit maintains camera synchronization.
Lifetime Warranty
Enclosure
Dimensions:
8.5"H x 7.5"W x 3.5"D
1/2" and 3/4" combination knockouts
Applications
24VAC or 28VAC power for CCTV cameras, heaters,
and other video accessories
You must be logged in to request more information about products.
Login or Call
for Pricing.
Special Order Item.
14.5 AMP, 32 FUSED OUTPUT P.S.
You must be logged in to request more information about products.
Login or Call
for Pricing.
Clearance Item
(call to verify pricing
and availability)
24 VAC 4 CAM POWER SUPPLY
Model ALTV244 provides 24VAC or 28VAC distributed via
four (4) fuse protected outputs.
Agency Listings
CE Approved.
Features/Specifications
24VAC or 28VAC selectable output
4 amp @ 24VAC or 3.5 amp @ 28VAC (100VA) supply current.
Four (4) fuse protected outputs.
Output fuses are rated @ 3.5 amp 115VAC 50/60Hz, .9 amp input.
Surge suppression AC power LED indicator Power On/Off switch
Unit maintains camera synchronization.
Lifetime Warranty
Enclosure
Dimensions:
8.5"H x 7.5"W x 3.5"D.
1/2" and 3/4" combination knockouts
Applications
24VAC or 28VAC power for CCTV cameras, heaters
and other video accessories.
You must be logged in to request more information about products.
Login or Call
for Pricing.
Qty: ~3
Normal Stocking Item.
24VAC CCTV PWR.SUP. 8 CAM. 4 A
Model ALTV248 provides 24VAC or 28VAC distributed via eight (8) fuse
protected outputs.
ALTV248220 is a 220VAC input
version of this unit.
Agency Listings
CE Approved.
Features/Specifications
24VAC or 28VAC selectable output
4 amp @ 24VAC or 3.5 amp @ 28VAC (100VA) supply current.
Eight (8) fuse protected outputs.Output fuses are rated @ 3.5 amp
115VAC 50/60Hz, .9 amp input.Surge suppression
AC power LED indicator. Power On/Off switch
Unit maintains camera synchronization.
Lifetime Warranty
Enclosure
Dimensions:
8.5"H x 7.5"W x 3.5"D
1/2" and 3/4" combination knockouts
Applications
24VAC or 28VAC power for
CCTV cameras, heaters and
other video accessories
You must be logged in to request more information about products.
Login or Call
for Pricing.
Qty: ~2
Normal Stocking Item.
24VAC 7A 8CH CCTV PWR SPLY
Model ALTV248175UL provides 24VAC or 28VAC distributed via
eight (8) fuse protected outputs
Agency Listings
UL Listed for Commercial CCTV Equipment (UL2044),
CUL Listed - CSA Standard C22.2 No.1-98, Audio, Video
and Similar Equipment. File# E148639. CE Approved.
Features/Specifications
24VAC or 28VAC selectable output
7 amp @ 24VAC or 6.25 amp @ 28VAC (175VA) supply current.
Eight (8) fuse protected outputs.Output fuses are rated @ 3.5 amp
115VAC 50/60Hz, 1.73 amp input. Surge suppression
AC power LED indicator. Illuminated Power Disconnect Circuit Breaker with manual reset
Unit maintains camera synchronization.
Lifetime Warranty
Enclosure
Dimensions:
12.25"H x 7.25"W x 4.5"D.
1/2" and 3/4" combination knockouts
Applications
24VAC or 28VAC power for CCTV cameras, heaters,
and other video accessories
You must be logged in to request more information about products.
Login or Call
for Pricing.
Normal Stocking Item.
24VAC 14A 8CH PWR SUPPLY
Model ALTV248300 provides 24VAC
or 28VAC distributed via
eight (8) fuse protected outputs.
Features/Specifications
24VAC or 28VAC selectable output
14 amp @ 24VAC or 12.5 amp @
28VAC (350VA) supply current.
Eight (8) fuse protected outputs.
Output fuses are rated @ 3.5 amp.
115VAC 50/60Hz, 2.7 amp input.
Surge suppression AC power
LED indicator.
Illuminated Power Disconnect Circuit Breaker with manual reset
Unit maintains camera synchronization.
Lifetime Warranty
Enclosure
Dimensions:
12.25"H x 7.25"W x 4.5"D
1/2" and 3/4" combination knockouts
Applications
24VAC or 28VAC power for CCTV cameras, heaters, and
other video accessories
You must be logged in to request more information about products.
Login or Call
for Pricing.
Normal Stocking Item.
8 CAM 25 AMP UL POWER SUPPLY
Agency Listings
UL Listed for Commercial CCTV Equipment (UL2044)
CUL Listed - CSA Standard C22.2 No.1-98, Audio, Video
and Similar Equipment. File# E148639. CE Approved.
Features/Specifications
24VAC or 28VAC selectable output.25 amp @ 24VAC
(600VA) or 20 amp @ 28VAC (560VA) supply current.
Eight (8) fuse protected outputs.Output fuses are
rated @ 3.5 amp. 115VAC 50/60Hz, 5.4 amp input.
Surge suppression. AC power LED indicator.
Illuminated Power Disconnect Circuit Breaker
with manual reset.Unit maintains camera synchronization.
Lifetime Warranty
Enclosure
Dimensions: 13.5"H x 13"W x 3.25"
1/2" and 3/4" combination knockouts.
Applications:
24VAC or 28VAC power for CCTV cameras
heaters, and other video accessories
You must be logged in to request more information about products.
Login or Call
for Pricing.
Special Order Item.
6-15VDC 4 WALLMOUNT 4 OUTPUT
6-15VDC selectable output. 4 amp supply current. Four 4 fuse protected Class 2 Rated power limited outputs. Output fuses are rated 3.5 amp. 115VAC 50/60Hz, .9 amp input.
Filtered and electronically regulated outputs. Short circuit and thermal overload protection. AC power LED indicator. Illuminated Power Disconnect Circuit Breaker with manual reset. Unit maintains camera synchronization.
Dimensions: 8.5"H x 7.5"W x 3.5"D. 1/2" and 3/4" combination knockouts 6-15VDC power for CCTV cameras, heaters, and other video accessories.
You must be logged in to request more information about products.
Login or Call
for Pricing.
Special Order Item.
6-15VDC 16 OUTPUTS 6AMPS UL
6-15VDC selectable output.
6 amp supply current.
Sixteen (16) fuse protected outputs.
Output fuses are rated @ 3.5 amp.
115VAC 50/60Hz, 1.5 amp input.
Filtered and electronically regulated outputs.
Short circuit and thermal overload protection.
AC power LED indicator.
Illuminated Power Disconnect Circuit Breaker with manual reset.
Unit maintains camera synchronization
You must be logged in to request more information about products.
Login or Call
for Pricing.
Special Order Item.
6 TO 15 DC 8 CAM P.S.
Model ALTV615DC8UL provides 6-15VDC distributed via
eight (8) fuse protected outputs.
Agency Listings
UL Listed for Commercial CCTV Equipment (UL2044)
CUL Listed - CSA Standard C22.2 No.1-98, Audio, Video and Similar Equipment.
File# E148639.CE Approved
Features/Specifications
6-15VDC selectable output 4 amp total supply current
Eight (8) fuse protected Class 2 Rated power limited outputs.
Output fuses are rated @ 3.5 amp.115VAC 50/60Hz, .9 amp input
Filtered and electronically regulated outputs
Short circuit and thermal overload protection AC power LED indicator.
Power On/Off switch Unit maintains camera synchronization.
Lifetime Warranty
Enclosure
Dimensions:
13.5"H x 13"W x 3.25"D.
1/2" and 3/4" combination knockouts
Applications
6-15VDC power for CCTV cameras, heaters,
and other video accessories.
You must be logged in to request more information about products.
Login or Call
for Pricing.
Qty: ~2
Special Order Item.
4 CH EVENT TIMER IN ENCLOSURE
12 to 24 volts AC or DC operation
Standby current: 20mA with relays off combined with 40mA for each
relay on.
Four (4) Form “C" relay contacts are rated 10 amp @120VAC/28VDC.
EE Prom memory protects against loss of programming due to
power failure.
Accurate crystal controlled clock (DC operation).
Momentary and/or Latching Events.
254 individually programmed daily/weekly events.
Block programming capacity can accommodate a total of 1778 events
per week.
254 programmable Holiday events.
“First man in" option.
Alphanumeric LCD display simplifies programming.
Standard or Daylight Savings Time settings.
Automatic compensation for leap year.
Each relay operates independently.
Built-in charger for 12VDC sealed lead acid or gel type batteries
(Max charge current 300mA).
Lithium battery backup maintains clock.
User friendly keyboard programming.
Specification Sheet: AX-AT4.pdf
You must be logged in to request more information about products.
Login or Call
for Pricing.
Special Order Item.
3.5 AMP FUSE FOR ALTRONIX ALTV
Features/Specifications
3.5 amp fuse (3 AG)
.25" fuse
Fast blow
Quantity 100
You must be logged in to request more information about products.
Login or Call
for Pricing.
Qty: ~1
Normal Stocking Item.
LOW POWER DISCONNECT MODULE
The LPD low power disconnect
module is the convenient way to
add a low battery or low power
disconnect feature to any power
supply rated up to 8 amp. Threshold
is adjustable for added flexibility
Features/Specifications
Low voltage cutoff:
12VDC-10.5 volts (+/-.3 volts)
24VDC-20 volts (+/- .3 volts).
Restore voltage threshold:
12VDC-11.5 volts (+/-.3 volts)
24VDC-23 volts (+/- .3 volts).
12VDC or 24VDC input.
Lifetime Warranty.
Board
Dimensions (approximate):
2.2"W x 2.75"L x 1"H
You must be logged in to request more information about products.
Login or Call
for Pricing.
Qty: ~2
Special Order Item.
Note: prices subject to change without notice.
